Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-5703 - Standard Only

Cleanliness Guidelines for Printed Board Fabricators

Document #:
IPC-5703
Revision
Original Version
Product Type
Standard Only
Released:  05/17/2013
Language
English
Current Revision
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

IPC-5701 - Standard Only

Users Guide for Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5701
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
Tackling PCB cleanliness is a tough job; residues on printed circuit boards are directly related to the reliability of the produced hardware and can result in serious failures if not known or monitored. But how do you measure "cleanliness"? How clean is "clean"? The IPC-5701 provides guidance into how these issues should be approached and specified in purchasing documents, addressing levels of...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC-4563 - Standard Only

Resin Coated Copper Foil for Printed Boards Guideline

Document #:
IPC-4563
Revision
Original Version
Product Type
Standard Only
Released:  02/11/2008
Language
English
Current Revision
This guideline covers the requirements for resin coated copper foil intended for use in the formation of high density interconnect surface microvias for printed boards and printed board assemblies. 19 pages. Released November 2007.
no-image-available

IPC-4555 - Standard Only

Performance Specification for High Temperature Organic Solderability Preservatives (OSP) for Printed Boards

Document #:
IPC-4555
Revision
Original Version
Product Type
Standard Only
Released:  05/31/2022
Language
English
Current Revision
The IPC-4555 standard covers the requirements and testing for organic solderability preservatives (OSP) processes for printed boards to be used primarily for electrical and electronic circuits. Details for lead free soldering are covered in IPC-4555

IPC-6012 - Revision E - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Standard Only
Released:  02/20/2020
Language
English
IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

IPC-9241 - Standard Only

Guidelines for Microsection Preparation

Document #:
IPC-9241
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2017
Language
English
Current Revision
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...
no-image-available

IPC-2901 - Standard Only

Pb-free Design and Assembly Implementation Guide

Document #:
IPC/PERM-2901
Revision
Original Version
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
The European Union’s Restriction of Hazardous Substances (RoHS) legislation has had a profound impact on the electronics industry. One of the restricted substances, lead (Pb), is commonly used in alloys with tin for component finishes, printed board finishes and solders. Pb-free materials directly affect product performance, reliability and service life in many ways. There have been numerous...

IPC-4121 - Standard Only

Guidelines for Selecting Core Construction for Multilayer Printed Wiring Board Applications

Document #:
IPC-4121
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2000
Language
English
Current Revision
IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

IPC-6015 - Standard Only

Qualification & Performance Specification for Organic Multichip Module (MCM-L) Mounting & Interconnecting Structures

Document #:
IPC-6015
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1998
Language
English
Current Revision
Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

IPC/EIA-J-STD-032 - Standard Only

Performance Standard for Ball Grid Array Balls

Document #:
IPC/EIA-J-STD-032
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2002
Language
English
Current Revision
This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

Moisture/Reflow Sensitivity Classification for Nonhermetic Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  02/03/2015
Language
English
IPC JEDEC J-STD-020 is used to determine what moisture-sensitivity-level (MSL) classification level should be used so that surface mount devices (SMDs) can be properly packaged, stored and handled to avoid subsequent thermal and mechanical damage during the assembly solder reflow attachment and/or repair operation. J-STD-020 covers components to be processed at higher temperatures for lead-free...

IPC-2225 - Standard Only

Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies

Document #:
IPC-2225
Revision
Original Version
Product Type
Standard Only
Released:  05/01/1998
Language
English
Current Revision
Used in conjunction with IPC-2221A, IPC-2225 establishes the requirements and other considerations (thermal, electrical, electromechanical and mechanical) for the design of Single Chip Module (SCM-L), MCM or MCM-L assemblies. Key concepts include adhesive interconnection information, typical die attach materials, microvia material properties and relationships with DFM and DFE.

IPC-NC-349 - Standard Only

Computer Numerical Control Formatting for Drillers and Routers

Document #:
IPC-NC-349
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Defines a machine readable input format for Computer Numerical Control (CNC) drilling and routing machine tools used by the printed wiring board industry. The format may be used to transfer drilling and routing information between printed board designers, manufacturers and users or as the output CNC standard from converters that expand higher level design input such as IPC-D-350 data. Provides a...
no-image-available

IPC-OI-645 - Standard Only

Standard for Visual Optical Inspection Aids

Document #:
IPC-OI-645
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Current Revision
Establishes requirements, definitions and certification provisions for optical inspection aids. Defines inspection grades to be used as accept/reject criteria for optical inspection aids. 40 pages. Released October 1993.

IPC-6012 - Revision D - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Standard Only
Released:  09/22/2015
Language
English
This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...
no-image-available

IPC/EIA-J-STD-028 - Standard Only

Performance Standard for Construction of Flip Chip and Chip Scale Bumps

Document #:
IPC/EIA-J-STD-028
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1999
Language
English
Current Revision
This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
no-image-available

IPC-MC-790 - Standard Only

Guidelines for Multichip Module Technology Utilization

Document #:
IPC-MC-790
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1992
Language
English
Current Revision
Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

IPC-TF-870 - Standard Only

Qualification and Performance of Polymer Thick Film Printed Boards

Document #:
IPC-TF-870
Revision
Original Version
Product Type
Standard Only
Released:  11/01/1989
Language
English
Current Revision
Covers the materials, qualification, certification and performance requirements for multilayer polymer thick film (PTF) printed, extrusion deposited, or otherwise applied conductor, insulator and through-hole technology. This specification may also be used for procurement of single and double-sided boards. 59 pages. Released November 1989.
no-image-available

JEDEC/IPC-JP002 - Standard Only

JEDEC/IPC Current Tin Whiskers Theory and Mitigation Practices Guideline

Document #:
JEDEC/IPC-JP002
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2006
Language
English
Current Revision
This document will provide insight into the theory behind tin whisker formation as it is known today and, based on this knowledge, potential mitigation practices that may delay the onset of, or prevent tin whisker formation. The potential effectiveness of various mitigation practices will also be briefly discussed. References behind each of the theories and mitigation practices are provided. It...

EIA/IPC/JEDEC-J-STD-002 - Revision D - Standard Only

Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

Document #:
EIA/IPC/JEDEC-J-STD-002
Revision
D
Product Type
Standard Only
Released:  06/24/2013
Language
English
This standard prescribes test methods, defect definitions, acceptance criteria, and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs and tabs. A test method for the resistance to dissolution/dewetting of metallization is also included in the standard. Intended for use by both vendors and users, J-STD-002D was developed by...

IPC-D-422 - Standard Only

Design Guide for Press Fit Rigid Printed Board Back Planes

Document #:
IPC-D-422
Revision
Original Version
Product Type
Standard Only
Released:  09/01/1982
Language
English
Current Revision
Contains backplane design information from the fabrication and assembly perspective. Includes sections on design and documentation; fabrication; assembly; repair; and inspection. 17 pages. Revised September 1982.
no-image-available

IPC-D-354 - Standard Only

Library Format Description for Printed Boards in Digital Form

Document #:
IPC-D-354
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1987
Language
English
Current Revision
Describes the usage of libraries within the processing and generation of information files. The data contained within covers both the definition and usage of internal (existing within the information file) and external libraries. The libraries can be used to make generated data more compact and facilitate data exchange and archival. The subroutines within a library can be used one or more times...
no-image-available

IPC-D-351 - Standard Only

Printed Board Drawings in Digital Form

Document #:
IPC-D-351
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Describes an intelligent, digital format for transfer of drawings between printed wiring board designers, manufacturers and customers. Also conveys additional requirements, guidelines and examples necessary to provide the data structures and concepts for drawing description in digital form. Supplements ANSI/IPC-D-350. Pertains to four basic types of drawings: master drawings, schematics, assembly...
no-image-available

IPC-D-355 - Standard Only

Printed Board Automated Assembly Description in Digital Form

Document #:
IPC-D-355
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Describes an intelligent, digital data transfer format for describing component mounting information. Supplements IPC-D-350 and is for designers and assemblers. Data included are pin location, component orientation, etc. This document is frozen; no future updates are planned. 33 pages. Released January 1995.
no-image-available

IPC-D-352 - Standard Only

Electronic Design Data Description for Printed Boards in Digital Form

Document #:
IPC-D-352
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Describes the relationship between elements used in electromechanical design and packaging of printed boards. Includes descriptions for logical and physical elements necessary as input to a design system, as well as the network of interconnection description between the various electronic parts. Provides the capability of describing all elements in their final form upon design completion. The...

IPC-CA-821 - Standard Only

General Requirements for Thermally Conductive Adhesives

Document #:
IPC-CA-821
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

IPC-A-311 - Standard Only

Process Controls for Phototool Generation and Use

Document #:
IPC-A-311
Revision
Original Version
Product Type
Standard Only
Released:  03/01/1996
Language
English
Current Revision
Covers the information and data to be collected during the generation and use of phototools to improve artwork quality, thereby improving yields downstream. It also helps establish and maintain ISO 9000 certification and SPC by facilitating troubleshooting, standardizing the process for both experienced and inexperienced operators and by identifying process improvements for the ultimate...

IPC-A-142 - Standard Only

Specification for Finished Fabric Woven from Aramid for Printed Boards

Document #:
IPC-A-142
Revision
Original Version
Product Type
Standard Only
Released:  06/01/1990
Language
English
Current Revision
Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.
no-image-available

IPC-9503 - Standard Only

Moisture Sensitivity Classification for Non-IC Components

Document #:
IPC-9503
Revision
Original Version
Product Type
Standard Only
Released:  04/01/1999
Language
English
Current Revision
This standard identifies the moisture sensitivity classification level of passive surface mount devices and through-hole components, subjected to reflow soldering, so that they can be properly packaged, stored, and handled to avoid subsequent thermal/mechanical damage during assembly solder reflow attachment and/or repair operation. This standard may be used to determine what classification level...

IPC-9591 - Standard Only

Performance Parameters (Mechanical, Electrical, Environmental and Quality/Reliability) for Air Moving Devices

Document #:
IPC-9591
Revision
Original Version
Product Type
Standard Only
Released:  04/01/2006
Language
English
Current Revision
This document standardizes the performance parameters for air moving devices. The phrase "air moving device" (or "air mover") refers to equipment such as, fans, blowers and other forced air movement technologies. These air moving devices are used in the electronics industry for the cooling of heat-producing components, and range from small devices mounted directly to hot components such as...

IPC-9641 - Standard Only

High Temperature Printed Board Flatness Guideline

Document #:
IPC-9641
Revision
Original Version
Product Type
Standard Only
Released:  07/10/2013
Language
English
Current Revision
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

IPC-9199 - Standard Only

Statistical Process Control (SPC) Quality Rating

Document #:
IPC-9199
Revision
Original Version
Product Type
Standard Only
Released:  09/01/2002
Language
English
Current Revision
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

IPC-6013 - Revision D - Standard Only

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Standard Only
Released:  09/01/2017
Language
English
The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...

IPC-2612 - Standard Only

Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)

Document #:
IPC-2612
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...

IPC-4101 - Revision D - Standard with Amendment 1

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard with amendment(s)
Released:  05/12/2014
Language
English
IPC-4101D-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 65 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but with...

IPC-4101 - Revision D - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard Only
Released:  05/12/2014
Language
English
This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...
no-image-available

IPC-2223 - Revision D - Standard Only

Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-2223
Revision
D
Product Type
Standard Only
Released:  09/20/2016
Language
English
Used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. Revision D provides new design guidance and...

IPC-4130 - Standard Only

Specification & Characterization Methods for Nonwoven "E" Glass Mat

Document #:
IPC-4130
Revision
Original Version
Product Type
Standard Only
Released:  09/01/1998
Language
English
Current Revision
Determines the nomenclature, definitions and requirements for materials made from nonwoven "E" glass fibers. IPC-4130 also includes specification sheets for selecting and purchasing these materials. 14 pages. Released September 1998. Equivalent to IEC Publicly Available Specification (PAS) 62212

IPC-3408 - Standard Only

General Requirements for Anisotropically Conductive Adhesives Films

Document #:
IPC-3408
Revision
Original Version
Product Type
Standard Only
Released:  11/01/1996
Language
English
Current Revision
This document covers requirements and test methods for anisotropically conductive adhesive films used to bond and electrically connect components. Applications include the following: flexible PWB-to-glass, flexible PWB-to-rigid PWB, flip chip-to-glass, flip chip-to-flexible PWB, flip chip-to-rigid PWB, and fine pitch SMD. The adhesive film may be supplied pre-attached to a flexible circuit or...

IPC-3406 - Standard Only

Guidelines for Electrically Conductive Surface Mount Adhesives

Document #:
IPC-3406
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
Current Revision
IPC-3406 offers guidelines for selecting electrically conductive adhesives for use in electronics manufacturing as solder alternatives. The process discussion attempts to stay within the bounds of the existing solder assembly infrastructure. Both major types of adhesives, isotropic (conducting equally in all directions) and anisotropic (unidirectional conductivity) are covered. Polymer adhesives...
no-image-available

IPC-2612-01 - Standard Only

Sectional Requirements for Electronic Diagramming Symbol Generation Methodology

Document #:
IPC-2612-1
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

IPC-2524 - Standard Only

PWB Fabrication Data Quality Rating System

Document #:
IPC-2524
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2009
Language
English
Current Revision
This document describes a PWB fabrication data quality rating system used by fabricators to evaluate incoming data package integrity. Includes information on conformance to both fabricator and customer design rules and can be used by printed board designers as an output quality check. 16 pages. Released February 1999.
no-image-available

IPC-1731 - Standard Only

Strategic Raw Materials Supplier Qualification Profile

Document #:
IPC-1731
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2000
Language
English
Current Revision
Suppliers of raw materials for laminate manufacturing now have an industry-approved questionnaire to supply current and potential customers with a self-assessment of their facilities. IPC-1731 gives suppliers of raw materials the opportunity to create a profile of their manufacturing facility(s) that will be consistent with those developed by other industry suppliers. Using the Microsoft Word (TM)...
no-image-available

IPC-1331 - Standard Only

Voluntary Safety Standard for Electrically Heated Process Equipment

Document #:
IPC-1331
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2000
Language
English
Current Revision
This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.

IPC-A-600 - Revision K - Standard Only

Abnahmekriterien für Leiterplatten

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  01/18/2021
Language
German
Current Revision
IPC-A-600K-DE ist das ultimative, illustrierte Handbuch für Annahmekriterien von Leiterplatten! Diese Richtlinie im Vierfarb-Druck enthält Bilder und Illustrationen der Zustände „Anzustreben“, „Zulässig“ und „Fehler“, die an unbestückten Leiterplatten im Innern oder auf der Oberfläche beobachtbar sind. Stellen Sie sicher, dass Ihre Mitarbeiter, Prüfer und Ingenieure über die aktuellste Version...

IPC-1601 - Revision A - Standard Only

Printed Board Handling and Storage Guidelines

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  06/27/2016
Language
English
The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...

IPC-4552 - Revision A - Standard Only

Performance Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Boards

Document #:
IPC-4552
Revision
A
Product Type
Standard Only
Released:  08/22/2017
Language
English
The IPC-4552A performance specification sets requirements for Electroless Nickel/Immersion Gold (ENIG) deposit thicknesses for applications including soldering, wire bonding and as a contact finish. The IPC-4552A is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) and original equipment manufacturers (OEM). The IPC-4552A standard may be...
no-image-available

IPC-A-600 - Revision K - Standard Only

Acceptabilité des circuits imprimés

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  03/12/2021
Language
French
Current Revision
LʼIPC-A-600K est le guide illustré de référence sur lʼacceptabilité des circuits imprimés ! LʼIPC-A-600K est un document en quatre couleurs fournissant des photographies et des illustrations de la cible, des conditions « objectif », acceptables et non conformes qui sont observables en interne ou en externe sur des circuits imprimés nus. Veillez à ce que vos opérateurs, inspecteurs et ingénieurs...

IPC-2221 - Revision B - Standard Only

Generic Standard on Printed Board Design

Document #:
IPC-2221
Revision
B
Product Type
Standard Only
Released:  11/20/2012
Language
English
IPC-2221B is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision B are new criteria for conductor characteristics, surface finishes, via protection...

IPC-7711/21 - Revision C - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  02/01/2017
Language
English
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
no-image-available

IPC-A-600 - Revision M - Standard Only

プリント基板の受入れ

Document #:
IPC-A-600
Revision
M
Product Type
Standard Only
Released:  11/25/2025
Language
Japanese
Current Revision
プリント基板の受入れに関する図解付きガイドの決定版！この4色刷りの文書では、ベアプリント基板の内部または外部から観察可能なコンディションについて、目標、許容可能、不適合といったそれぞれ状態を写真とイラストで解説している。本書は、オペレータ/検査担当者/エンジニアに必要な最新の業界コンセンサス情報を提供するものである。この改版(M版)では多数の写真と図を更新するとともに、プリント基板の端部めっき、キャビティ、端部のバリ、ディウェッティング、導体厚さ、アニュラリング(位置合わせ)内の銅の侵入、めっきボイド等のトピックを新規に、あるいは拡張して解説している。本書の内容は、IPC-6012FとIPC-6013Eに記載する許容要件と同期している。IPC-A-600Kに優先する。

IPC-2222 - Revision A - Standard Only

Sectional Design Standard for Rigid Organic Printed Boards

Document #:
IPC-2222
Revision
A
Product Type
Standard Only
Released:  12/14/2010
Language
English
Used in conjunction with IPC-2221, IPC-2222 establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. This standard applies to single-sided, double-sided or multi-layered boards. Key concepts in this document are: rigid laminate properties, design requirements for printed board assembly and design...
no-image-available

IPC-6011 - Revision A - Redline Standard

Redline Comparison IPC-6011 to IPC-6011A

Document #:
IPC-6011
Revision
A
Product Type
Redline Standard
Released:  04/29/2025
Language
English
Current Revision
IPC-6011A Redline document shows the changes from IPC-6011 to IPC-6011A in a side-by-side comparison of the two documents. The IPC-6011A Redline is available in electronic format only.
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC-A-600 - Revision M - Standard Only

印制板的可接受性

Document #:
IPC-A-600
Revision
M
Product Type
Standard Only
Released:  10/14/2025
Language
Chinese
Current Revision
关于印制板可接受性的权威图解指南！本四色文件提供了裸印制板内部或外部可观察到的目标、可接受和不符合条件的照片和示意图。确保您的操作人员、检验员和工程师掌握最新的行业共识信息。版本M新增或修订了数十张照片和示意图，新增和扩展了有关印制板边缘电镀、印制板阶梯槽、边缘毛刺、退润湿、导体厚度、环宽（重合度）、内部铜渗透和镀层空洞等主题的内容。本文件与 IPC-6012F 和 IPC-6013E 中表述的可接受性要求同步。取代 IPC-A-600K。
no-image-available

IPC-J-STD-006 - Revision B - Standard with Amendments 1 & 2

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
B
Product Type
Standard with amendment(s)
Released:  10/22/2009
Language
English
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
no-image-available

IPC-A-600 - Revision K - Standard Only

Tiêu Chuẩn Chấp Nhận Đối Với Bảng Mạch In

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  02/20/2024
Language
Vietnamese
Current Revision
Những hướng dẫn được minh họa có tính định nghĩa cho khả năng chấp nhận đối với bảng mạch in! Tài liệu 4 màu này cung cấp các bức ảnh và các hình minh họa cho các tình trạng mục tiêu, chấp nhận và không phù hợp đối với các tình trạng quan sát được bên trong và bên ngoài bảng mạch in chưa lắp ráp. Hãy đảm bảo công nhân, người kiểm tra và các kỹ sư của bạn có được những thông tin đồng thuận mới nhất...
no-image-available

IPC-A-600 - Revision K - Standard Only

การยอมรับของบอร์ดพิมพ์

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  03/15/2024
Language
Thai
Current Revision
ภาพประกอบใช้เป็นคู่มือเพื่อแสดงการยอมรับได้ของบอร์ดพิมพ์! เอกสารสี่สีนี้ได้ให้ภาพถ่ายและภาพประกอบที่แสดงถึงสภาวะเป้าหมาย ยอมรับได้ และ ไม่สอดคล้องตามข้อกำหนด ซึ่งสามารถสังเกตเห็นได้ทั้งจากภายในหรือภายนอกบนบอร์ดพิมพ์เปล่า ตรวจสอบให้แน่ใจว่าผู้ปฏิบัติงาน ผู้ตรวจสอบ และวิศวกรของคุณมีข้อมูลที่เป็นเอกฉันทามติของอุตสาหกรรมที่เป็นปัจจุบันที่สุด ด้วยรูปถ่ายและภาพประกอบใหม่หรือที่มีการแก้ไขจำนวนมาก...
IPC-1791C Cover Image

IPC-1791 - Revision C - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
C
Product Type
Standard Only
Released:  03/22/2023
Language
English
IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...
no-image-available

IPC/JEDEC-J-STD-609 - Revision B - Standard Only

Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes

Document #:
IPC/JEDEC-J-STD-609
Revision
B
Product Type
Standard Only
Released:  11/01/2016
Language
English
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...

IPC-4562 - Revision A - Standard with Amendment 1

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
A
Product Type
Standard with amendment(s)
Released:  01/01/2016
Language
English
IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that was previously removed during the revision A actions. Unless otherwise agreed upon between the user and supplier (AABUS), metal foils...
IPC-J-STD-004C Cover Image

IPC-J-STD-004 - Revision C - Standard Only

Requirements for Soldering Fluxes

Document #:
IPC-J-STD-004
Revision
C
Product Type
Standard Only
Released:  02/28/2022
Language
English
The IPC J-STD-004C standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-004C standard may be used for quality control and procurement purposes.

IPC-A-600 - Revision K - Standard Only

印制板的可接受性

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  10/16/2020
Language
Chinese
Current Revision
IPC-A-600K是印制板可接受性的权威图示说明！IPC-A-600K是一份四色文档，提供了目标的照片和插图，可以在裸露的印刷电路板上内部或外部观察到的可接受和不符合的条件。确保您的操作员，检查员和工程师具有最新的行业共识信息。IPC-A-600K提供了数十种新的或经过修订的照片和插图，涵盖了诸如开裂，背钻结构，边缘连接器连接盘，铜包裹板，镀层空隙和微小异常，微孔目标连接盘穿刺，内层分离和镀层悬垂。该文档与IPC-6012E和IPC-6013D中表达的可接受性要求保持同步。取代IPC-A-600J。
IPC-1791B Cover Image

IPC-1791 - Revision B - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
B
Product Type
Standard Only
Released:  09/15/2021
Language
English
IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.
IPC-A-600K ZH Cover

IPC-A-600 - Revision K - Standard Only

印刷電路板的可接受性

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  07/27/2021
Language
Chinese (Zhōngwén)
Current Revision
IPC-A-600K是印刷電路板可接受性的權威圖示說明！IPC-A-600K是一份四色文檔，提供了目標的照片和插圖，可以在裸露的印刷電路板上內部或外部觀察到的可接受和不符合的條件。確保您的操作員，檢查員和工程師具有最新的行業共識資訊。IPC-A-600K提供了數十種新的或經過修訂的照片和插圖，涵蓋了諸如開裂，背鑽結構，邊緣連接器連接盤，銅包裹板，鍍層空隙和微小異常，微孔目標連接盤穿刺，內層分離和鍍層懸垂。該文檔與IPC-6012E和IPC-6013D中表達的可接受性要求保持同步。取代IPC-A-600J。
no-image-available

IPC-A-600 - Revision K - Standard Only

Admisibilidad de las placas impresas

Document #:
IPC-A-600
Revision
K
Product Type
Standard Only
Released:  03/09/2021
Language
Spanish
Current Revision
El IPC-A-600K es la guía ilustrada definitiva de admisibilidad de las placas impresas. El IPC-A-600K es un documento a cuatro colores donde se recogen fotografías e ilustraciones de las condiciones objetivo, aceptables y no conformes que son observables de forma interna o externa en placas impresas vacías. Verifique que sus operadores, inspectores e ingenieros dispongan de la más actualizada...
no-image-available

IPC-1791 - Revision A - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
A
Product Type
Standard Only
Released:  02/20/2020
Language
English
IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...

IPC-7095 - Revision C - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
C
Product Type
Standard Only
Released:  01/28/2013
Language
English
Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...
no-image-available

IPC-2141 - Revision A - Standard Only

Design Guide for High-Speed Controlled Impedance Circuit Boards

Document #:
IPC-2141
Revision
A
Product Type
Standard Only
Released:  03/01/2004
Language
English
Controlled impedance is the maintenance of some specified tolerance in the characteristic impedance of an interconnect line (transmission line) that is used to connect different devices on a circuit. Controlled impedance is often a design consideration for high-speed digital or high-frequency analog circuits. This guide is intended to be used by circuit designers, packaging engineers, printed...

IPC-J-STD-005 - Revision A - Standard Only

Requirements for Soldering Pastes

Document #:
IPC-J-STD-005
Revision
A
Product Type
Standard Only
Released:  02/14/2012
Language
English
This standard lists requirements for qualification and characterization of solder paste. It references test methods and criteria for metal content, viscosity, slump, solder ball, tack and wetting of solder pastes. Additional support is provided in IPC-HDBK-005, Guide to Solder Paste Assessment (not included with purchase of this standard). Supersedes J-STD-005.

IPC-9201 - Revision A - Standard Only

Surface Insulation Resistance Handbook

Document #:
IPC-9201
Revision
A
Product Type
Standard Only
Released:  09/19/2007
Language
English
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...

IPC-J-STD-004 - Revision B - Standard with Amendment 1

Requirements for Soldering Fluxes

Document #:
IPC-J-STD-004
Revision
B
Product Type
Standard Only
Released:  02/28/2012
Language
English
This standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. This standard may be used for quality control and procurement purposes. The purpose of this standard is to classify and characterize tin/lead and lead-free soldering flux materials for use in electronic metallurgical interconnections for printed circuit...
no-image-available

IPC-QL-653 - Revision A - Standard Only

Certification of Facilities that Inspect/Test Printed Boards, Components & Materials

Document #:
IPC-QL-653
Revision
A
Product Type
Standard Only
Released:  11/01/1997
Language
English
This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.

IPC-DR-572 - Revision A - Standard Only

Drilling Guidelines for Printed Boards

Document #:
IPC-DR-572
Revision
A
Product Type
Standard Only
Released:  03/01/2007
Language
English
This document provides guidelines for generating good quality holes in printed circuit boards (PCBs) made from a wide variety of materials. It addresses the following topics: Drill Bits, Tooling, Drilling Stacked Materials, Drilling Machines, Drilling Operation, Drilled Hole Quality and Trouble Shooting. 12 pages. Released March 2007.

IPC-6012 - Revision C - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
C
Product Type
Standard Only
Released:  04/13/2010
Language
English
Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...

IPC-7525 - Revision B - Standard Only

Stencil Design Guidelines

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  10/24/2011
Language
English
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

IPC/JEDEC-J-STD-033 - Revision C - Standard Only

Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-033
Revision
C
Product Type
Standard Only
Released:  08/01/2014
Language
English
Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

IPC-J-STD-003 - Revision C - Standard with Amendment 1

Solderability Tests for Printed Boards

Document #:
IPC-J-STD-003
Revision
C
Product Type
Standard with amendment(s)
Released:  09/30/2014
Language
English
J-STD-003C prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin-lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods described in this standard is to determine the ability of...

IPC-J-STD-004 - Revision A - Standard Only

SUPERSEDED BY J-STD-004B

Document #:
IPC-J-STD-004
Revision
A
Product Type
Standard Only
Released:  01/01/2004
Language
English
DoD Adopted 1995 Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available online for free download. Supersedes QQ...
no-image-available

IPC-J-STD-003 - Revision B - Standard Only

Solderability Tests for Printed Boards

Document #:
IPC-J-STD-003
Revision
B
Product Type
Standard Only
Released:  03/01/2007
Language
English
This standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods described in this standard is to determine the ability of...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

J-STD-003C-English

J-STD-003C: Solderability Tests for Printed Boards

Document #:
IPC-J-STD-003
Revision
C
Product Type
Standard Only
Released:  04/01/2014
Released:  01/31/2026
Language
English
J-STD-003C prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands and plated-through holes utilizing either tin-lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods described in this standard is to determine the ability of...
no-image-available

IPC-7095 - Revision A - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
A
Product Type
Standard Only
Released:  10/01/2004
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
English
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...

IPC-6018 - Revision C - Standard Only

Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
C
Product Type
Standard Only
Released:  08/09/2016
Language
English
This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

IPC-7351 - Revision A - Standard Only

SUPERSEDED BY 7351B

Document #:
IPC-7351
Revision
A
Product Type
Standard Only
Released:  02/01/2007
Language
English
NEW! IPC-7351A includes both the standard and an IPC-7351A land pattern calculator on CD-ROM for accessing component and land pattern dimensional data.The calculator includes the document’s mathematical algorithms so users can build a land pattern for a corresponding surface mount part quickly and accurately.The tool also allows for modification of dimensional attributes of IPC-approved land...

IPC-4204 - Revision A - Standard with Amendment 1

Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry

Document #:
IPC-4204
Revision
A
Product Type
Standard with amendment(s)
Released:  02/22/2014
Language
English
This standard establishes the classification system, the qualification and quality performance requirements for flexible metal-clad dielectric materials to be used for the fabrication of flexible printed circuitry and flexible flat cable. It encompasses 12 specification sheets that result from the combinations of various copper foil claddings; a polymer base dielectric selected from at least two...

IPC-4412 - Revision B - Standard Only

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Standard Only
Released:  06/17/2013
Language
English
IPC-4412B exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E" glass) borosilicate glass. Bulk "E" glass, for ease of description, is composed of a blend of raw metal oxides that form a borosilicate glass upon melting. Once...

IPC-6013 - Revision C - Standard Only

Qualification and Performance Specification for Flexible Printed Boards

Document #:
IPC-6013
Revision
C
Product Type
Standard Only
Released:  12/18/2013
Language
English
Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...

IPC-4202 - Revision A - Standard Only

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Standard Only
Released:  04/13/2010
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed circuitry and flexible flat cables. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most...
101-200 of 481

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards