Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

IPC-2581 - Revision C - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
C
Product Type
Standard Only
Released:  11/20/2020
Language
English
Current Revision
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...

IPC-1782 - Revision A - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
A
Product Type
Standard Only
Released:  01/13/2021
Language
English
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.
no-image-available

IPC-2581 - Revision B - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
B
Product Type
Standard Only
Released:  09/01/2013
Language
English
This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...
IPC/DAC-2552 Cover Image

IPC-DAC-2552 - Standard Only

General Electronic Components Model Based Definition (MBD) Standard

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  08/02/2022
Language
English
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...

IPC-1782 - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  11/01/2016
Language
English
The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...
no-image-available

IPC-9716 - Standard Only

自動光学検査(AOI)を用いたプリント基板の工程管理に関する要求事項

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  06/27/2025
Language
Japanese
Current Revision
本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。
no-image-available

IPC/DAC-2552 -Standard Only

通用电子元器件基于模型的定义

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  10/25/2024
Language
Chinese
Current Revision
本标准是由IPC与广东省数字化学会（DAC）联合开发和发布的国际标准，目的旨在解决业内各厂家提供的电子元器件几何模型及语义信息参差不齐，导致使用方需要重复建模处理且无法复用等问题。 定义如何将电子元器件的设计、仿真、制造等领域的属性关联到电子元器件的三维模型及对应的子部件上的数字化建模，通过规范各供应商按模型交付，工具间（CAD/CAE等）数据集成打通的方式，可实现高效
no-image-available

IPC-1782 - Standard Only

电子产品的制造和供应链可追溯性标准

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  04/12/2019
Language
Chinese
Current Revision
缺乏统一的元器件可追溯性标准已经导致不必要的资源消耗（例如时间、人力、金钱等）来跟踪事件或部件的来源，并补救相关质量、可靠性等问题。标准缺失也导致难以一致地创建和适当地执行必要的合同。 本标准建立了制造商和供应链可追溯性的最低要求，此要求是基于供需双方协商确定（AABUS）的感知风险。本标准适用于所有产品，制程，组件，部件，元器件，所使用的设备以及由供需双方在印制电路板组件制造以及机械组装中定义的其他项目。
1-10 of 10

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards