Menu
Close
Contact Us

Standards

Your results

  • 1001

Document #

Language

Products

IPC-7530 - Standard Only

Guidelines for Temperature Profiling for Mass Soldering (Reflow & Wave) Processes

Document #:
IPC-7530
Revision
Original Version
Product Type
Standard Only
Released:  05/01/2001
Language
English
During mass soldering, it is important that all solder joints reach the minimum soldering (reflow) temperature to assure metallurgical bonding of the solder alloy and the base metals to be soldered. Metallurgical bonding requires that both surfaces to be soldered, as well as the solder, reach this minimum soldering temperature for a sufficient time to allow the wetting of the solder surfaces. This...

IPC-2251 - Standard Only

Design Guide for the Packaging of High Speed Electronic Circuit

Document #:
IPC-2251
Revision
Original Version
Product Type
Standard Only
Released:  11/01/2003
Language
English
This guideline addresses the major factors influencing the design of high-speed circuitry. Considerations include electrical noise, electromagnetic interference, signal propagation time, impedance, thermo-mechanical environmental protection, and heat dissipation. Supersedes IPC-D-317A. Key improvements over the IPC-D-317A document include updated impedance models for embedded microstrip, centered...
no-image-available

IPC-2315 - Standard Only

Design Guide for High Density Interconnects & Microvias

Document #:
IPC-2315
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2000
Language
English
Published jointly with the Japan Printed Circuits Association, IPC/JPCA-2315 provides an easy to follow tutorial on the selection of HDI and microvia design rules and structures. Addresses various considerations when designing an HDI printed wiring board including design examples and processes, selection of materials, general descriptions, and various microvia technologies. Offers designers and...

IPC-7094 - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die Size Components

Document #:
IPC-7094
Revision
Original Version
Product Type
Standard Only
Released:  03/18/2009
Language
English
Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...

IPC/JPCA-4104 - Standard Only

Specification for High Density Interconnect (HDI) and Microvia Materials

Document #:
IPC-4104
Revision
Original Version
Product Type
Standard Only
Released:  05/01/1999
Language
English
Covers the various conductive and dielectric materials that can be used for the fabrication of HDI and microvias. The 23 specification sheets included in IPC/JPCA-4104 cover the qualification and conformance requirements for such materials as photoimageable dielectric dry films and liquids, epoxy blends and coated foils. IPC/JPCA-4104 also includes six new test methods developed specifically for...

IPC-SM-785-English

IPC-SM-785: Guidelines for Accelerated Reliability Testing of Surface Mount Attachments

Document #:
IPC-SM-785
Revision
Original Version
Product Type
Standard Only
Released:  11/01/1992
Language
English
Guidelines for accelerated reliability testing of surface mount solder attachments when evaluating and extrapolating the results of these tests towards actual use environments of electronic assemblies. 50 pages. Released November 1992. Included in the IPC-C-103 and the IPC-C-1000 Collections

J-STD-012 - Standard Only

Implementation of Flip Chip & Chip Scale Technology

Document #:
IPC-J-STD-012
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1996
Language
English
This informative document describes the implementation of flip chip and related chip scale semiconductor packaging technologies. The areas discussed include design considerations, assembly processes, technology choices, application and reliability data. Chip packaging variations include flip chip, HDI, micro BGA, micro SMT and SLICC. Also provides general information on implementing flip chip and...

IPC-A-640 - Standard Only

Acceptance Requirements for Optical Fiber, Optical Cable, and Hybrid Wiring Harness Assemblies

Document #:
IPC-A-640
Revision
Original Version
Product Type
Standard Only
Released:  08/04/2017
Language
English
The IPC-A-640, Acceptance Requirements for Optical Fiber, Optical Cable and Hybrid Wiring Harness Assemblies standard provides acceptance requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640 standard includes full-color illustrations and an Excel spreadsheet Verification and Compliance...

IPC-D-640 - Standard Only

Design and Critical Process Requirements for Optical Fiber, Optical Cable and Hybrid Wiring

Document #:
IPC-D-640
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2016
Language
English
This full-color document provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. This standard also includes an Excel spreadsheet Verification and Compliance checklist.
no-image-available

IPC/JEDEC-J-STD-035 - Standard Only

Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components

Document #:
IPC/JEDEC-J-STD-035
Revision
Original Version
Product Type
Standard Only
Released:  04/01/1999
Language
English
This test method defines the procedures for performing acoustic microscopy on non-hermetic encapsulated electronic components. It provides users with an acoustic microscopy process flow for detecting defects non-destructively in plastic packages while achieving reproducibility. Developed by IPC and JEDEC. 16 pages. Released April 1999. Equivalent to IEC Publicly Available Specification (PAS) 62191
no-image-available

J-STD-013 - Standard Only

Implementation of Ball Grid Array & Other High Density Technology

Document #:
IPC-J-STD-013
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
This document establishes the requirements and interactions necessary for printed board assembly processes for interconnecting high performance/high pin count IC packages. Includes information on design principles, material selection, board fabrication, assembly technology, testing strategy and reliability expectations based on end-use environments. Developed by IPC, EIA, MCNC and Sematech. 96...
no-image-available

IPC-J-STD-001 - Revision F - Redline Standard

J-STD-001 Revision E to Revision F Redline Comparison Document

Document #:
IPC-J-STD-001
Revision
F
Product Type
Redline Standard
Released:  10/21/2014
Language
English
J-STD-001 Revision E to Revision F Redline Comparison Document. This document is free to Task Group members participating in development of the standard and to Certification Centers with current training licenses for the associated Training and Certification program. CITs who are not members of the Task Group are encouraged to contact his or her MIT for a copy of the redline document.
no-image-available

IPC/WHMA-A-620 - Revision E - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  03/06/2023
Language
English
IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...
no-image-available

IPC/WHMA-A-620 - Revision E - Redline - Addendum - Space and Military

IPC/WHMA-A-620D-S to IPC/WHMA-A-620E-S Redline Document

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  11/28/2023
Language
English
IPC/WHMA-A-620D-S to IPC/WHMA-A-620E-S Redline document shows the changes from IPC/WHMA-A-620D-S to IPC/WHMA-A-620E-S in a side-by-side comparison of the two documents. The IPC/WHMA-A-620D-S to IPC/WHMA-A-620E-S redline is only available in electronic format. It is not available in hardcopy.
no-image-available

IPC-J-STD-001 - Revision G - Redline Standard

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
G
Product Type
Redline Standard
Released:  10/31/2017
Language
English
This is a redline document showing the changes from IPC J-STD-001F with Amendment 1 to IPC J-STD-001G. This document provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows the deleted/changed text in the IPC J-STD-001F with Amendment 1 pages and the new/revised text in purple highlights in the IPC J-STD-001G pages. Yellow pop-up boxes are...

IPC-D-620 - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
Original Version
Product Type
Standard Only
Released:  12/08/2015
Language
English
IPC-D-620 provides design and critical process requirements for the three product classes of cable and wire harness assemblies as well as military/space applications. It is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum Three white papers are included to provide guidance on key topics...

IPC-HERMES-9852 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2019
Language
English
IPC-HERMES-9852 an open industry standard, developed by The Hermes Standard Initiative and approved by IPC, provides a state-of-the-art communication protocol for machine-to-machine communication between equipment units in electronics assembly lines for surface-mount technology (SMT). Thus IPC-HERMES-9852 represents a next generation standard to the technology documented in IPC-SMEMA-9851...
no-image-available

IPC-A-610 - Revision G - Redline Standard

Acceptability of Electronic Assemblies-Redline

Document #:
IPC-A-610
Revision
G
Product Type
Redline Standard
Released:  10/31/2017
Language
English
This is a redline document showing the changes from IPC-A-610F with Amendment 1 to IPC-A-610G. This document provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows the deleted/changed text in the IPC-A-610F with Amendment 1 pages and the new/revised text in purple highlights in the IPC-A-610G pages. Yellow pop-up boxes are also present in...
no-image-available

IPC-A-610 - Revision F - Redline Standard

IPC-A-610 Revision E to Revision F Redline Comparison Document

Document #:
IPC-A-610
Revision
F
Product Type
Redline Standard
Released:  10/21/2014
Language
English
IPC-A-610 Revision E to Revision F Redline Comparison Document. This document is free to Task Group members participating in development of the standard and to Certification Centers with current training licenses for the associated Training and Certification program. CITs who are not members of the Task Group are encouraged to contact his or her MIT for a copy of the redline document.

IPC-9202 - Standard Only

Material and Process Characterization/Qualification Test Protocol for Assessing Electrochemical Performance

Document #:
IPC-9202
Revision
Original Version
Product Type
Standard Only
Released:  10/20/2011
Language
English
This document provides tests that record changes in surface insulation resistance (SIR) on a representative sample of a printed circuit assembly. It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electrochemical reactions that grossly affect reliability. It uses test vehicles that...

IPC-9709 - Standard Only

Test Guidelines for Acoustic Emission Measurement during Mechanical Testing

Document #:
IPC-9709
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
Surface mount pad cratering typically initiates prior to detection by existing electrical monitoring test methods. There are limited instrumentation techniques that are currently available that can identify non-electrical damage and its location to a high degree of accuracy. This guideline document establishes an acoustic emission (AE) method to evaluate the performance and reliability of surface...

IPC-9203 - Standard Only

Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle

Document #:
IPC-9203
Revision
Original Version
Product Type
Standard Only
Released:  04/27/2012
Language
English
While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...

IPC-9121 - Standard Only

Troubleshooting for PCB Fabrication Processes

Document #:
IPC-9121
Revision
Original Version
Product Type
Standard Only
Released:  02/01/2016
Language
English
This handbook is an essential resource for anyone involved in manufacturing or purchasing PCBs. Hundreds of real-world, full-color photos spotlight more than 650 PCB process defects, with causes and corrective actions for each. IPC-9121 supersedes the PCB sections of IPC-PE-740A. Released March 2016
626-650 of 1001

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards