Menu
Close
Contact Us

Standards

Your results

  • 1001

Document #

Language

Products

IPC-J-STD-001 - Revision G - Addendum with Amendment 1 - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC J-STD-001G. Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
G
Product Type
Addendum with amendment(s)
Released:  03/16/2020
Language
English
The IPC J-STD-001GS AM 1 amendment to the IPC J-STD-001GS space addendum supplements or replaces specifically identified requirements of IPC J-STD-001G for the cleaning requirements for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space and military applications.
no-image-available

IPC-A-610 - Revision J - Standard Only

การยอมรับได้ของงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  05/22/2025
Language
Thai
Current Revision
IPC-A-610J เป็นมาตรฐานการยอมรับการประกอบชิ้นส่วนอิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ ผู้เข้าร่วมจาก 31 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปใช้ในอุตสาหกรรมอิเล็กทรอนิกส์ เอกสารนี้ถือเป็นเอกสารที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน และบุคคลอื่น ๆ ที่สนใจเกณฑ์การยอมรับสำหรับงานประกอบชิ้นส่วนอิเล็กทรอนิกส์ IPC-A-610 ได้รับการพัฒนาโดยทำงานร่วมกับ J-STD...
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

Anforderungen an gelötete elektrische und elektronische Baugruppen

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/08/2021
Language
German
Current Revision
IPC-J-STD-001H-DE ist weltweit anerkannt für seine Kriterien zu Lötprozessen und -materialien. Die Richtlinie IPC-J-STD-001H-DE wurde unter Mitwirkung von Teilnehmern aus 27 Ländern aktualisiert, die ihre Beiträge und ihr Fachwissen zur Verfügung gestellt haben. Sie enthält die neuesten Kriterien für die Branche, einschließlich einer Anleitung für die Verwendung von Röntgensystemen zur Inspektion...
no-image-available

IPC-A-610 - Revision J - Standard Only

Abnahmekriterien für elektronische Baugruppen

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  04/02/2025
Language
German
Current Revision
IPC-A-610J ist die in der Elektronik-Branche weltweit am meisten verwendete Abnahme-Richtlinie für Elektronikbaugruppen. Teilnehmer aus 31 Ländern haben ihre Beiträge und ihr Fachwissen eingebracht, um dieses Dokument der Elektronik-Branche zur Verfügung zu stellen. Es ist ein absolutes Muss für Prüfer, Montagemitarbeiter und Andere, die ein Interesse an Abnahmekriterien für elektronische...
no-image-available

IPC-A-610 - Revision J - Standard Only

电子组件的可接受性

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  10/25/2024
Language
Chinese
Current Revision
IPC-A-610J 是电子行业应用最广泛的电子组件验收标准。来自31个国家的参与者提供了他们的意见和专业知识，为电子行业带来了这份文件。 这是检查人员、操作人员和其他对电子组件验收标准感兴趣的人员的必备工具。IPC-A-610 是与 J-STD-001 和 IPC/WHMA-A-620 协同开发的。
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

Requisitos para Ensambles Eléctricos y Electrónicos Soldados

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  01/08/2026
Language
Spanish
Current Revision
La norma J-STD-001J es reconocida mundialmente por sus criterios relacionados con los procesos y materiales de soldadura. Se ha actualizado gracias a las contribuciones y la experiencia de participantes de 27 países. La norma J-STD-001J es esencial para todos los profesionales de la industria electrónica interesados en los criterios de proceso y aceptación para ensambles eléctricos y electrónicos...
no-image-available

IPC-4554 - Amendment 1

Specification for Immersion Tin Plating for Printed Circuit Boards

Document #:
IPC-4554
Revision
Original Version
Product Type
Amendment
Released:  09/01/2013
Language
English
Current Revision
IPC-4554, "Specification for Immersion Tin Plating for Printed Circuit Boards," is the third document in a series of specifications [the first two are: IPC-4552 which addresses electroless nickel/immersion gold (ENIG) and IPC-4553 which addresses immersion silver (IAg)] that set the requirements for printed circuit board surface finishes that are alternates to eutectic tin-lead. IPC-4554, a full...
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

Exigences des Assemblages Électriques et Électroniques Brasés

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  01/05/2026
Language
French
Current Revision
La norme J-STD-001J est reconnue mondialement pour ses critères relatifs aux procédés et matériaux de soudage. Elle a été mise à jour grâce aux contributions et à l'expertise de participants issus de 27 pays. La norme J-STD-001J est indispensable pour tous les professionnels de l'industrie électronique intéressés par les critères de processus et d'acceptation des assemblages électriques et...
no-image-available

IPC-4821 - Amendment 1

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Amendment
Released:  05/01/2006
Language
English
Current Revision
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
no-image-available

IPC-1754 - Amendment 2

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Amendment
Released:  06/23/2020
Language
English
Current Revision
IPC-1754-Am2, establishes the requirements for the exchanging material and substance data for Products between suppliers and their customers and has been developed through the participation of aerospace, defense, automotive, electronics and solution provider representatives.
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

Krav til loddede elektriske og elektroniske produkter

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  05/04/2022
Language
Danish
Current Revision
IPC-J-STD-001H anerkendes globalt for sine kriterier for loddeprocesser og materialer. Opdateret med input og ekspertise leveret af deltagere fra 27 lande, IPC-J-STD-001H standarden indeholder de nyeste kriterier til industrien, inklusiv vejledning om anvendelse af røntgen til inspektion af hulmonterede lodninger, som ikke er synlige på anden måde.IPC-J-STD-001H er et must for folk i...
no-image-available

IPC-A-610 - Revision H - Standard Only

Kritéria přijatelnosti elektronických sestav

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Czech
Current Revision
IPC-A-610H je nejpoužívanější standard pro provádění přejímek elektronických sestav. Standard IPC-A-610H obsahuje obecnou aktualizaci dokumentu, představuje několik nových typů komponent pro povrchovou montáž, a odstraňuje cílové podmínky. Účastníci z 29 zemí poskytli své příspěvky a odborné znalosti, aby tento dokument přinesli elektronickému průmyslu.

Jde o nepostradatelnou příručku pro...

no-image-available

IPC-A-610 - Revision J - Standard Only

電子組件的可接受性

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  12/17/2024
Language
Chinese (Zhōngwén)
Current Revision
IPC-A-610J 是電子行業應用最廣泛的電子元件驗收標準。來自31個國家的參與者提供了他們的意見和專業知識，為電子行業帶來了這份文件。 這是檢查人員、操作人員和其他對電子元件驗收標準感興趣的人員的必備工具。IPC-A-610 是與 J-STD-001 和 IPC/WHMA-A-620 協同開發的
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

솔더링된 전기 및 전자 조립품 요구조건

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  09/30/2025
Language
Korean
Current Revision
J-STD-001J는 솔더링 공정과 재료에 대한 기준으로 세계적인 인정을 받는다. 정보와 전문지식을 제공하는 27개국의 참여자가 갱신 작업을 진행했다. J-STD-001J는 전기 및 전자 조립품 공정과 허용기준에 관심 있는 전자 산업 종사자가 반드시 소지해야 하는 것이다. J-STD-001은 IPC-A-610과 호환하도록 개발되었으며 요구조건에 대한 추가 정보와 설명을 원하는 사람은 IPC-HDBK-001을 확인할 수 있다. J-STD-001J를 구입한다면 IPC-A-610J도 구입하는 것이 바람직하다. 이 두 표준서를 함께 사용하면 전기 및 전자 조립품 제조 공정과 육안 검사 허용기준을 확인할 수 있다.
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-A-610 - Revision H - Standard Only

电子组件的可接受性

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/21/2021
Language
Chinese
Current Revision
IPC-A-610H是电子行业广泛采用的电子组件验收标准。IPC-A-610H标准中包含了本文件的一般更新内容，介绍了一些新型表面贴装元器件，同时删除了目标条件。 本文件在电子行业成功问世离不开来自29个国家/地区的参与者，这些参与者在本文件编制期间投入了大量的精力并贡献了宝贵的专业知识。 该标准是检查人员、操作人员及其他与电子组件验收要求相关的人员必须掌握的技术标准。 与IPC-A-610一起制定的标准还有J-STD-001和IPC/WHMA-A-620。

IPC-A-600 - Revision J - Standard Only

Kryteria Dopuszczenia Płyt Drukowanych

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  04/12/2019
Language
Polish
Current Revision
Pełne, ilustrowane wydanie przewodnika dla kryteriów dopuszczenia płyt drukowanych. Niniejszy czterokolorowy dokument dostarcza fotografii i ilustracji stanów docelowych, dopuszczalnych i niezgodnych, które są dostrzegalne wewnętrznie lub zewnętrznie na gołych płytkach drukowanych. Upewnij się, że Twoi operatorzy, inspektorzy i inżynierowie posiadają najnowsze informacje uzgodnione w przemyśle...
no-image-available

IPC-A-610 - Revision J - Standard Only

Tiêu Chuẩn Chấp Nhận Các Cụm Lắp Ráp Điện Tử

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  04/29/2025
Language
Vietnamese
Current Revision
IPC-A-610J là tiêu chuẩn chấp nhận các cụm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Những đơn vị tham gia từ 31 quốc gia đã cung cấp thông tin đầu vào cùng chuyên môn của họ để đưa tài liệu này đến với ngành công nghiệp điện tử. Đây là tài liệu bắt buộc phải có đối với những người kiểm hàng, người thao tác và những người khác quan tâm đến tiêu chuẩn chấp nhận đối...
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

ข้อกำหนดสำหรับงานบัดกรีชิ้นส่วนทางไฟฟ้าและงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  04/29/2025
Language
Thai
Current Revision
J-STD-001J ได้รับการยอมรับทั่วโลกในด้านเกณฑ์สำหรับกระบวนการบัดกรีและวัสดุ มีผู้เข้าร่วมจาก 27 ประเทศที่ให้ข้อมูลและความเชี่ยวชาญ J-STD-001J เป็นสิ่งที่ต้องมีสำหรับผู้ที่อยู่ในอุตสาหกรรมอิเล็กทรอนิกส์ที่สนใจในกระบวนการและเกณฑ์การยอมรับสำหรับการประกอบชิ้นส่วนไฟฟ้าและอิเล็กทรอนิกส์ J-STD-001 ได้รับการพัฒนาควบคู่ไปกับ IPC-A-610 และได้รับการสนับสนุนโดย IPC-HDBK-001...
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

Các Yêu Cầu đối với Các Cụm Lắp Ráp Điện và Điện Tử Được Hàn

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  04/10/2025
Language
Vietnamese
Current Revision
J-STD-001J được công nhận trên toàn cầu về các tiêu chuẩn liên quan đến vật liệu và quy trình hàn . Được cập nhật với sự tham gia của các thành viên từ 27 quốc gia cung cấp thông tin đầu vào và chuyên môn. J-STD-001J là tài liệu bắt buộc dành cho những người trong ngành điện tử quan tâm đến quy trình và tiêu chuẩn chấp nhận đối với các cụm lắp ráp điện và điện tử. J-STD-001 được phát triển kết hợp...
no-image-available

IPC - J-STD-001 - Revision J - Standard Only

焊接的電氣和電子組件要求

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  01/27/2025
Language
Chinese (Zhōngwén)
Current Revision
J-STD-001J 是全球公認的焊接工藝和材料標準。根據來自27個國家的參與者提供的意見和專業知識進行更新。 J-STD-001J 是電子行業中對電氣和電子元件的工藝和驗收標準感興趣的人員的必備工具。J-STD-001 是與 IPC-A-610 協同開發的，並得到 IPC-HDBK-001 的支援，供那些需要更多資訊和要求解釋的人使用。如果您購買了 J-STD-001J，還應該購買和使用 IPC-A-610J，因為它們可以一起使用，為電氣和電子元件的製造提供工藝和外觀驗收標準。
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

焊接的电气和电子组件要求

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  01/10/2025
Language
Chinese
Current Revision
J-STD-001J 是全球公认的焊接工艺和材料标准。根据来自27个国家的参与者提供的意见和专业知识进行更新。 J-STD-001J 是电子行业中对电气和电子组件的工艺和验收标准感兴趣的人员的必备工具。J-STD-001 是与 IPC-A-610 协同开发的，并得到 IPC-HDBK-001 的支持，供那些需要更多信息和要求解释的人使用。如果您购买了 J-STD-001J，还应该购买和使用 IPC-A-610J，因为它们可以一起使用，为电气和电子组件的制造提供工艺和外观验收标准。
no-image-available

IPC-J-STD-001 - Revision J - Standard Only

はんだ付される電気および電子組立品に関する要求事項

Document #:
IPC-J-STD-001
Revision
J
Product Type
Standard Only
Released:  12/17/2024
Language
Japanese
Current Revision
J-STD-001Jは、電気および電子組立品の工程と受入基準に関心のあるエレクトロニクス業界関係者にとって必携の書である。 J-STD-001はIPC-A-610と共に開発されたものであり、要求事項に関する追加情報や説明についてはIPC-HDBK-001で補足されている。IPC-A-610Jでは電気および電子組立品の工程と外観の合格基準が提供されているため、J-STD-001Jを購入する際にはIPC-A-610Jも併せて購入することをお勧めする。
no-image-available

IPC-A-610 - Revision H - Standard Only

Acceptatie van geassembleerde printplaten

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  05/04/2022
Language
Dutch
Current Revision
IPC-A-610 is het meest gebruikte acceptatiedocument voor elektronica-assemblage. Bijgewerkt met deelnemers uit 17 landen die input en expertise leveren, brengt dit document de nieuwste criteria samen met veel nieuwe en herziene grafische afbeeldingen uit de industrie. Dit is een must-have voor inspecteurs, operators en anderen die geïnteresseerd zijn in de acceptatiecriteria voor elektronische...
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

Lehimli Elektrikli ve Elektronik Takımların Gereklilikleri

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  05/31/2022
Language
Turkish
Current Revision
IPC-J-STD-001H, lehimleme prosesleri ve malzemeleri konusundaki kriterleri ile dünya çapında tanınmaktadır. 27 ülkeden girdi ve uzmanlık sağlayan katılımcılarla güncellenen IPC-J-STD-001H standardı, başka hiçbir şekilde görülemeyen delik-içi lehim koşullarının denetlenmesi için x-ışını kullanımına ilişkin rehberlik te dahil olmak üzere sektöre en son kriterleri getirmektedir. IPC-J-STD-001H...
J-STD-001H Vietnamese Cover Image

IPC-J-STD-001 - Revision H - Standard Only

Các Yêu Cầu Cho Các Sản Phẩm Điện và Điện Tử Hàn Lắp Ráp

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  01/10/2022
Language
Vietnamese
Current Revision
IPC-J-STD-001H Được công nhận trên toàn cầu về tiêu chuẩn cho các quy trình hàn và các nguyên vật liệu. Được cập nhật với những người tham gia từ 27 quốc gia cung cấp đầu vào và ý kiến chuyên môn, tiêu chuẩn IPC-J-STD-001H mang đến các tiêu chuẩn mới nhất cho ngành công nghiệp cùng với hướng dẫn sử dụng tia X để kiểm tra các tình trạng mối hàn xuyên lỗ mà không thể kiểm tra được bằng các phương...
IPC-A-610H Korean Cover Image

IPC-A-610 - Revision H - Standard Only

전자 어셈블리의 허용 가능성

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  01/10/2022
Language
Korean
Current Revision
IPC-A-610H는 전자 산업에서 가장 널리 사용되는 전자 어셈블리 허용 표준이다. IPC-A-610H 표준은 문서에 대한 일반 업데이트를 포함하며, 몇 가지 새로운 표면 실장 소자 유형을 도입하고 대상 조건을 제거한다. 29개국에서 온 참가자들은 이 문서를 전자 산업에 가져오기 위해 그들의 조언과 전문지식을 제공했다. 이는 전자 어셈블리의 허용 기준에 관심이 있는 검사자, 작업자 및 기타 사용자에게 반드시 필요한 사항이다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620과 함께 개발되었다.
IPC-A-610H Hungarian cover image

IPC-A-610 - Revision H - Standard Only

Elektronikai szerelvények elfogadhatósága

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Hungarian
Current Revision
Az IPC-A-610 a világon legszélesebb körben használt elektronikai szerelvényekkel foglalkozó szabvány. Az IPC-A-610H szabvány jó néhány dokumentum általános frissítését tartalmazza, számos új felületszerelt alkatrésztípus követelményeivel kiegészült és megszüntetésre került a cél állapot kritérium. A szabvány 29 országból beérkező újabb észrevételek, szakvélemények alapján biztosítja az...
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

焊接的电气和电子组件要求

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/12/2021
Language
Chinese
Current Revision
IPC-J-STD-001H是全球公认的焊接工艺和材料标准。 此次更新由27个国家/地区参与者参与编制，这些参与者在本文件更新期间投入了大量的精力并贡献了宝贵的专业知识。IPC-J-STD-001H标准是业内最新标准，包含了有关使用X射线方法检查其他方法难以检测的通孔焊料状况的指导信息。 IPC-J-STD-001H是关注电子行业电气和电子组件工艺和验收标准的人员必须掌握的技术标准。 J-STD-001是与IPC-A-610一起制定的标准，由IPC-HDBK-001提供支持，其中包含了一些额外信息和要求释义。如果您已购买了IPC-J-STD-001H，您还需要购买并使用IPC-A-610H，二种标准需要配合使用。
no-image-available

IPC-A-600 - Revision H - Standard Only

Acceptanskrav för mönsterkort

Document #:
IPC-A-600
Revision
H
Product Type
Standard Only
Released:  10/13/2010
Language
Swedish
Current Revision
NOUVEAU! Cette version prend en compte les exigences et les critères d’acceptabilité liés à l’utilisation d’alliages sans plomb. La révision A du standard industriel consensuel dénomé Critères d’Acceptation pour l’Assemblage de Câbles et de Faisceaux de câbles est désormais disponible. IPC et l’association Wire Harness Manufacturers Association (WHMA), ont collaboré pour développer de manière...
no-image-available

IPC-A-610 - Revision H - Standard Only

Tiêu Chuẩn Chấp Nhận Các Sản Phẩm Lắp Ráp Điện Tử

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  09/16/2021
Language
Vietnamese
Current Revision
IPC-A-610 là tiêu chuẩn chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Tiêu chuẩn IPC-A-610H bao gồm một cập nhận tổng quát, giới thiệu một số loại linh kiện SMT mới và loại bổ tình trạng mục tiêu. Những người tham gia từ 29 quốc gia cung cấp đầu vào và ý kiến chuyên môn để mang đến tài liệu này cho ngành công nghiệp điện tử. Đây là bộ tiêu chuẩn...
IPC-A-610H RO Cover Image

IPC-A-610 - Revision H - Standard Only

Acceptabilitatea Ansamblurilor Electronice

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Romanian
Current Revision
IPC-A-610H este cel mai folosit standard de acceptabilitate pentru asamblare electronice din industria electronică. Standardul IPC-A-610H include o actualizare generală a documentului, introduce mai multe tipuri noi de componente cu montare pe suprafață și elimină condițiile Obiectiv. Participanții din 29 de țări și-au adus contribuția și expertiza lor pentru a da acest document industriei...

IPC-A-600 - Revision J - Standard Only

プリント板の受け入れ

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  06/28/2017
Language
Japanese
Current Revision
本書は、プリント板の、外部または内部で観察可能な、目標、許容可能、または不適合条件について記載している。現在のIPC規格で求められている要求事項を、目に見える形で示しており、プリント板がこれら文書の規定に従わない場合には、製品の受け入れ基準は発注・受入当事者の合意のよるものとする。120の写真とイラストを追加/更新して、リビジョンEから改版が行われました。 本書は、明確な図解入りでプリント板の受け入れ基準を記述している。この4色のドキュメントは、部品実装前のプリント板 (ベアボード) の外観または内部的に観察可能な、許容可能な条件と不適合な条件を写真と説明図で記載している。業務に携わる作業者、検査員、技術者は、業界が合意した最新情報を把握していることを確認すべきである。改訂J版は、120以上の新規または改善した写真と説明図を使用して、マイクロビアと接合の大きさ (寸法)、銅めっき...
IPC-A-610H Thai Cover Image

IPC-A-610 - Standard Only

การยอมรับได้ของงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-A-610H เป็นมาตรฐานการยอมรับการประกอบอุปกรณ์อิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายมากที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ มาตรฐาน IPC-A-610H มีการอัพเดตทั่วไปในเอกสาร, แนะนำตัวอุปกรณ์ที่ติดตั้งบนพื้นผิวประเภทใหม่ๆ หลายประเภท และลบสภาวะเป้าหมายออกไป ผู้เข้าร่วมจาก 29 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปสู่อุตสาหกรรมอิเล็กทรอนิกส์ นี่เป็นสิ่งที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน...
J-STD-001H-TH Cover Images

IPC-J-STD-001 - Standard Only

ข้อกำหนดสำหรับงานบัดกรีทางไฟฟ้าและงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-J-STD-001H เป็นที่ยอมรับทั่วโลกในด้านเกณฑ์กระบวนการและวัสดุในการบัดกรี อัปเดตด้วยผู้เข้าร่วมจาก 27 ประเทศที่ให้ข้อมูลและความเชี่ยวชาญ มาตรฐาน IPC-J-STD-001H นำเกณฑ์ล่าสุดมาสู่อุตสาหกรรม รวมถึงคำแนะนำเกี่ยวกับการใช้เอ็กซ์เรย์เพื่อตรวจสอบสภาพการบัดกรีผ่านรูที่มองไม่เห็นโดยวิธีอื่น IPC-J-STD-001H...

IPC-A-600 - Revision J - Standard Only

Baskı Devre Kartlarının Kabul Edilebilirliği

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  01/03/2019
Language
Turkish
Current Revision
Baskı devre kartları kabul edilebilirliği için açıklamalı resimli bir rehber! Bu dört renkli döküman çıplak baskı devre kartlarında iç kısımdan ya da dışarıdan gözlemlenebilen hedef, kabul edilebilir ve uygun olmayan koşullar için fotoğraflar ve şekiller sağlamaktadır. Operatörleriniz, denetleme personeliniz ve mühendislerinizin en son yayınlanmış revizyonu kullanmasını sağlayınız. 120 adet yeni...
no-image-available

IPC-6012 - Revision D - Addendum with Amendment 1 - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum with amendment(s)
Released:  12/01/2018
Language
English
The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...

IPC-J-STD-001 - Revision F - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Addendum with amendment(s)
Released:  02/01/2017
Language
English
This addendum supplements J-STD-001F for soldered assemblies that must survive the vibration and thermal cyclic environments associated with space hardware. It is to be used with J-STD-001FS WAM 1.
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/01/2015
Language
English
This is an amendment to IPC J-STD-001F, a recognized industry-consensus standard covering materials and processes. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements and BGA voiding criteria, new graphics for several surface mount component types, revised staking criteria, and recognition of the paragraphs addressed in J-STD-001FS, Space...
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  12/14/2015
Language
English
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC-A-610 - Revision J - Standard Only

전자 조립품의 허용성

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  12/10/2025
Language
Korean
Current Revision
IPC-A-610J는 전자 산업에서 가장 널리 사용되는 전자 조립품 허용 표준서이다. 본 표준서는 31개국의 참여자가 제공한 정보와 전문지식을 바탕으로 전자 산업계에 제공된다. 본 표준서는 전자 조립품 허용기준에 관심 있는 검사자, 운용자 등이 반드시 소지해야 한다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620와 호환하도록 개발되었다.

IPC-A-610 - Revision G - Standard Only

Критерии приемки электронных сборок

Document #:
IPC-A-610
Revision
G
Product Type
Standard Only
Released:  04/09/2020
Language
Russian
Current Revision
Описание на русском IPC-A-610 – наиболее широко используемый в мире стандарт по приемке электронных сборок. Этот документ, в усовершенствование которого внесли свой вклад участники из 17 стран, поделившись информацией и своими знаниями и опытом, предоставляет отрасли новейшие критерии наряду со множеством новых и обновленных иллюстраций. Этот документ – то, что обязательно нужно иметь контролерам...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Reprise, Modification et Réparation des Assemblages Electroniques

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  06/27/2025
Language
French
Current Revision
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
no-image-available

IPC/WHMA-A-620 - Revision B - Amendment 1

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Amendment
Released:  08/01/2013
Language
English
This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B. When there are changes to a...
no-image-available

IPC/WHMA-A-620 - Revision E - Standard Only

Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  03/05/2025
Language
German
Current Revision
IPC/WHMA-A-620E ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620E beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo y/o al proceso

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  02/18/2019
Language
Spanish
Current Revision
El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Retrabajo, Modificacion y Reparacion de Ensambles Electronicos

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  01/05/2026
Language
Spanish
Current Revision
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
351-400 of 1001

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards