Menu
Close
Contact Us

Standards

Your results

  • 1001

Document #

Language

Products

IPC/WHMA-A-620 - Revision B - Standard Only

Juhtme- ja kaablikoostude vastavusnõuded

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  12/01/2014
Language
Estonian
Current Revision
IPC/WHMA-A-620B on ainus juhtme- ja kaablikoostude vastavusnõudeid sisaldav tööstuse konsensuslik standard ning see on väljatöötatud IPC ja Wire Harness Manufacturers Association (WHMA). UUS! Standard sisaldab laialdasi nõudeid survevalule, vormivalule, juhtmete jätkamisele, ilma isolatsiooni toeta juhtme pressimisele, isolatsiooni eemalduseta ühendustele, pistikutele, monoliitsetele ja tinatatud...

IPC-CH-65 - Revision B - Standard Only

印制板及组件清洗指南

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  05/09/2014
Language
Chinese
Current Revision
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
no-image-available

IPC-CC-830 - Revision C - Standard Only

印制线路组件用电气绝缘化合物的鉴定及性能

Document #:
IPC-CC-830
Revision
C
Product Type
Standard Only
Released:  05/29/2019
Language
Chinese
Current Revision
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Kablo ve Kablo Takımları için Kabul Gereklilikleri

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  11/12/2014
Language
Turkish
Current Revision
Revizyon B, Kablo ve Kablo Takımlarının Kabul Gereklilikleri için endüstrinin ortak dökümanı olmayı sürdürmektedir. IPC ile Kablo Takımları Üreticileri Birliği (WHMA), bu önemli güncellemeyi geliştirmek için beraber çalışmışlardır. YENİ! Dolgu, kalıplı dolgu, ekleme, yalıtkan desteği olmayan krimp kontakları, sıralı yalıtkan yer değiştirme konnektörleri, konnektör bağlantısı, sert ve uyumlu kablo...

IPC/WHMA-A-620 - Revision C - Standard Only

דרישות וקבלה של הרכבות כבלים ורתמות חוטים

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/18/2018
Language
Hebrew
Current Revision
תאור זוהי המהדורה העדכנית ביותר של תקן מוסכם לתעשייה ודרישות קבלה של הרכבות כבלים ורתמות חוטים. תקן זה כולל סעיפים חדשים לאבטחת חיווט, אבטחת בידודים ומידע מעודכן ברבים מהסעיפים, יחד עם למעלה מ- 700 תמונות ואיורים. תקן זה מפרט חומרים שיטות בדיקות וקריטריוני קבלה לייצור בלחיצה, אבטחה מכאנית וחיבורים מולחמים להרכבות ופעולות הקשורות להרכבת כבלים וחיווט. IPC/WHMA-A-620C תוכנן על ידי IPC והאיגוד לייצור...

IPC/WHMA-A-620 - Revision C - Standard Only

Kábel- és huzalköteg-szerelvények követelményei és elfogadása

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  04/12/2019
Language
Hungarian
Current Revision
Az egyetlen ipari konszenzuson alapuló huzal és vezeték szerelvényekkel kapcsolatos követelményeket és elfogadási kritériumokat tartalmazó szabvány legújabb verziója. Új alfejezetekkel egészültek ki a biztosítóhuzallal, biztosítósodronnyal, tömítőgyűrűkkel és kábelcsatornákkal kapcsolatos részek és a szabvány számos fejezete frissítésre került. Több mint 700 fotóval és illusztrációval ez a...
no-image-available

IPC-9204 - Standard Only

印刷电子柔性与可拉伸性能测试指南

Document #:
IPC-9204
Revision
B
Product Type
Standard Only
Released:  06/18/2019
Language
Chinese
Current Revision
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
no-image-available

IPC-6018 - Revision C - Standard Only

高频（微波）印制板的鉴定及性能规范

Document #:
IPC-6018
Revision
C
Product Type
Standard Only
Released:  04/11/2019
Language
Chinese
Current Revision
本规范涵盖了高频（微波）印制板鉴定和性能要求，包括有或无镀覆孔的单面板、双面板、含或不含埋孔/盲孔及金属芯的多层板。该标准涉及最终涂覆层和表面电镀涂覆层要求、导体、通孔/导通孔、验收测试的频次和质量一致性、电气与机械及环境要求。C版本在诸如HASL涂层、可选的表面镀层、边缘电镀、标记、微导通孔捕获和目标连接盘、铜盖覆电镀填塞孔、铜填充微孔、PTFE钻污和介质去除等领域中加入了许多新的要求。与IPC-6011一起使用。取代IPC-6018B和IPC-6016。 2017年12月翻译。
no-image-available

IPC-9691 - Revision B - Standard Only

IPC-TM-650 测试方法2.6.25耐导电阳极丝（CAF）及其他内部电化学迁移（ECM）测试用户指南

Document #:
IPC-9691
Revision
B
Product Type
Standard Only
Released:  04/11/2018
Language
Chinese
Current Revision
本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上
no-image-available

IPC-9704 - Revision A - Standard Only

印制板应变测试指南

Document #:
IPC/JEDEC-9704
Revision
A
Product Type
Standard Only
Released:  01/31/2026
Language
Chinese
Current Revision
本文件对印制板（PWB）制造过程中印制板组件的应变测试制定了详细的指南，这些制造过程包括组装、测试、系统集成及印制板的周转/运输。 本文件建议的程序使印制板组装厂能够独立进行所要求的应变测试，并为印制板翘曲测量和风险等级评估提供了量化的方法。

IPC-7711/21 - Revision B - Standard Only

Восстановление, модификация и ремонт электронных сборок

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  01/27/2008
Language
Russian
Current Revision
Описание английско Стандарт IPC-7711/21B «Восстановление, модификация и ремонт электронных сборок» был полностью обновлен по каждой процедуре, чтобы обеспечить возможность их применения как для бессвинцовых, так и для традиционных оловянно-свинцовых электронных сборок. Это однотомное издание содержит все ранее опубликованные изменения и несколько новых процедур для компонентов BGA (включая...

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  03/23/2009
Language
Swedish
Current Revision
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...

IPC-7525 - Revision B - Standard Only

Designrichtlinie für Druckschablonen

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  04/15/2013
Language
German
Current Revision
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...

IPC-7711/21 - Revision B - Standard Only

Refacerea, Modificarea și Reparația Ansamblurilor Electronice

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  08/06/2012
Language
Romanian
Current Revision
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...

IPC-7711/21 - Revision C - Standard Only

Wprowadzanie Poprawek, Modyfikacja i Naprawa Zespołów Elektronicznych

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  05/14/2019
Language
Polish
Current Revision
Niniejszy przewodnik dostarcza procedur dla wprowadzania poprawek, napraw i modyfikacji dla elektronicznych zespołów płyt drukowanych. W tej rewizji zawarte są procedury wcześniej opublikowane jako strony zmian, uaktualnione informacje ogólne i sekcja procedur wspólnych, nowe procedury dla BGA używające systemów rozpływu na skupioną podczerwień z integralnym podgrzewaniem oraz ogólnie uaktualnione...
no-image-available

IPC-7711/21 - Revision C - Standard Only

Rework, modificatie en repair van elektronische assemblages - Chapter 1

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  04/26/2019
Language
Dutch
Current Revision
Omschrijving in het Nederlands Deze handleiding bevat procedures voor rework, repair en modificatie van geassembleerde printplaten. Inbegrepen in deze revisie zijn de eerder uitgebrachte procedures met wijzigingspagina's, een bijgewerkte sectie van de algemene informatie en gemeenschappelijke procedures, nieuwe procedures voor BGA's met behulp van gerichte IR Reflow-systemen met geïntegreerde...
no-image-available

IPC-7530 - Revision A - Standard Only

群焊工艺温度曲线指南（再流焊和波峰焊

Document #:
IPC-7530
Revision
A
Product Type
Standard Only
Released:  05/29/2019
Language
Chinese
Current Revision
本标准的目的是为开发温度曲线提供有效和实用的信息，以生产可接受的锡铅和无铅的电子组件。该修订版将原来标准的重点从再流温度曲线扩展到包括激光焊曲线、选择焊曲线、波峰焊曲线或其他焊接曲线。该修订版还包括一个全彩色故障排除指南，用于解决可归因于分析的常见缺陷。
no-image-available

IPC-7711/21 - Revision B - Standard Only

Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
Turkish
Current Revision
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...

IPC-7711/21 - Revision B - Standard Only

Rework, modifikation og reparation af elektronikprodukter

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  12/19/2012
Language
Danish
Current Revision
Stor opdatering af blyfri support og forbedrede inspektionsvejledninger for reparationer og modifikationer! Denne vejledning omfatter alt, der er nødvendigt for reparation og rework af elektronikprodukter og printkort! IPC-7711B/7721B „Rework, modifikation og reparation af elektronikprodukter“ har komplette procedurer, som er blevet opdaterede for at sikre, at de er anvendelige til både blyfri og...

IPC-7711/21 - Revision B - Standard Only

Přepracování, modifikace a opravy elektronických sestav

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  01/27/2008
Language
Czech
Current Revision
Download an update to published IPC-7711B/7721B Part 3 Procedure 6.1.(English only) Základni aktualizace pro bezolovnatou technologii a zlepšené návody pro kontrolu oprav a modifikací Tento návod obsahuje vše, čeho je zapotřebí pro opravy a přepracování elektronických sestav a desek plošných spojů! IPC 7711/7721 Přepracování,modifikace a opravy elektronických sestav prošla kompletní aktualizaci...
no-image-available

IPC-7711/21 - Revision B - Standard Only

Rilavorazione, Modifica e Riparazione di Assemblati Elettronici

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
Italian
Current Revision
IPC-7711B/7721B rilavorazione, modifica e riparazione di assemblaggi elettronici un completo aggiornamento procedura per procedura al fine di garantirne l'applicabilità su entrambe le modalità di brasatura con Pb e senza Pb. Questo volume singolo include tutte le modifiche precedentemente pubblicate e diverse nuove procedure inerenti i BGA (compresi reballing) e la riparazione dei circuiti...

IPC-7711/21 - Revision C - Standard Only

Az elektronikai szerelvények újramunkálása, módosítása és javítása

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  01/10/2019
Language
Hungarian
Current Revision
LEIRÁS Angol nyelvű leírás Ezen útmutató eljárásokat tartalmaz az elektronikai szerelvények újramunkálására, javítására ás módosítására. Ezen revízióban a korábbi szabványváltozat eljárásai, az általános információs és közös eljárási részek is frissítésre kerültek. Új eljárásként a szabvány kiegészült a beépített előfűtővel rendelkező fókuszált infravörös BGA forrasztási eljárással és az összes...
no-image-available

IPC-6903 - Revision A - Standard Only

印刷电子设计与生产的术语及定义

Document #:
IPC-6903
Revision
A
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
IPC-6903A标准提供了62个印刷电子行业设计和制造相关的术语及定义。IPC-6903A标准为全球印刷电子行业提供一个共同的语言和知识
no-image-available

IPC-7351 - Revision B - Standard Only

表面贴装设计及连接盘图形标准通用要求

Document #:
IPC-7351
Revision
B
Product Type
Standard Only
Released:  02/24/2020
Language
Chinese
Current Revision
本文件中的信息旨在提供表面贴装连接盘图形的适当尺寸、形状和公差，以确保为形成适当的焊料填充提供充足的区域，从而满足IPC J-STD-001 标准的要求，同时能够对这些焊点进行检验、测试及返工。设计工程师可以使用这些信息去建立标准的连接盘图形，此连接盘图形不仅可用于手工设计， 还可用于计算机辅助设计系统。无论电子元器件是被贴装到印制板的单面还是双面，是采用波峰焊、再流焊，还是其他的焊接方式，连接盘图形和元器件尺寸都应该优化，以确保形成适当的焊点和检验准则。2010年6月出版，2020年1月翻译。

IPC-6012 - Revision B - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
B
Product Type
Standard Only
Released:  09/18/2008
Language
Swedish
Current Revision
Download the free Amendment 2 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. This is the Swedish Language version of IPC-6012B. This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal...
no-image-available

IPC-2221 - Revision A - Standard Only

Generic Standard on Printed Board Design

Document #:
IPC-2221
Revision
A
Product Type
Standard Only
Released:  06/04/2007
Language
Chinese
Current Revision
This is the Chinese language translation of IPC-2221A. Only available in electronic format. IPC-2221A is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to...

IPC-1601 - Revision A - Standard Only

Wytyczne dla obsługiwania i przechowywania płyt drukowanych

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  04/26/2019
Language
Polish
Current Revision
Jedyny dokument branżowy dotyczący obsługiwania, pakowania i przechowywania płytek drukowanych. Wskazówki zawarte w tym dokumencie mają na celu ochronę płyt drukowanych przed zanieczyszczeniem, fizycznym uszkodzeniem, utratą lutowalności i wchłanianiem wilgotności. Uwzględniono rodzaje i metody materiałów opakowaniowych, środowisko produkcyjne, obsługiwanie i transport, a także profile wygrzewania...
no-image-available

IPC-4202 - Revision B - Standard Only

挠性印制板用挠性基底电介质

Document #:
IPC-4202
Revision
B
Product Type
Standard Only
Released:  07/30/2019
Language
Chinese
Current Revision
本文档提供了全面的数据，帮助用户更轻松的确定挠性基底电介质材料的材料性能和兼容性，以制造挠性印制电路板。标准包括灵活的基础材料规格单，这些规格单针对已使用规格材料类型的最新属性进行了更新。标准建立了最新的分类体系、鉴定和质量符合性要求，其中包括高频介电特性。随着市场上的应用，标准还增加了碳氟化合物膜的新规格单。全文共23页。2017年3月发布。

IPC-4101 - Revision C - Standard Only

Spezifikation für Basismaterialien für starre Leiterplatten und Multilayerleiterplatten

Document #:
IPC-4101
Revision
C
Product Type
Standard Only
Released:  08/30/2009
Language
German
Current Revision
Beschreibungin Englisch Diese Spezifikation beinhaltet die Anforderungen an Basismaterialien, hier als Laminate oder Prepregs bezeichnet, die hauptsächlich in starren Leiterplatten oder Multilayerleiterplatten für elektrische und elektronische Schaltungen verwendet werden. Das Dokument enthält 66 einzelne Spezifikationsblätter, die nach Suchbegriffen sortiert sind. Diese Suchbegriffe erlauben es...
no-image-available

IPC-2221 - Revision B - Standard Only

プリント基板設計に関する共通基準

Document #:
IPC-2221
Revision
B
Product Type
Standard Only
Released:  09/20/2019
Language
Japanese
Current Revision
記述 IPC-2221Bは、IPC-2220シリーズの全文書の基本となる設計基準である。これは片面、両面、または多層を問わず、プリント基板およびその他の形状の部品実装構造または相互接続構造の設計に関し、 一般的な要求事項を規定するものである。本書、リビジョンBの多くの更新内容として、導体特性、表面仕上げ、ビアプロテクション、基板の電気試験、誘電特性、基板ハウジング、熱ストレス、コンプライアントピン、パネライゼーション、および内層・外層の銅はくの厚さに関する新規基準がある。附属書Aには、ロットの受入れおよび品質適合試験で用いられるテストクーポンの新規設計が記載されている。170ページ。 2012年出版。2015年4月翻訳。 目次をみる。pdfファイル。
no-image-available

IPC-1720 - Revision A - Standard Only

组装资格认证纲要

Document #:
IPC-1720
Revision
A
Product Type
Standard Only
Released:  10/05/2012
Language
Chinese
Current Revision
简要介绍 （英文） IPC-1720A由IPC OEM委员会开发，分为电子组件制造商的能力和有详细、实质性信息的供应商的OEM客户。本程序简化了审核过程且降低了审核频率，从而减少了文书工作且提高了效率。公司和分公司的描述，分公司能力简介 ，设备概况（现场审核前），技术概况要求，质量概况，以及制造概况。A版本由一个单一的，易使用的电子文档微软（ Word TM模板）组成，提供了具有合并和整理数据的电子功能。共56页。2004年7月发布。
no-image-available

IPC-1601 - Revision A - Standard Only

印制板操作和储存指南

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  04/12/2019
Language
Chinese
Current Revision
描述 关于印制板操作、包装和储存的行业指南。这些指南是为了保护印制板，避免其受到污染、物理损坏、可焊性降低、静电放电（必要时）和吸湿。本文件考虑了包装材料和方法、生产环境、操作和产品运输，建立了除湿烘烤曲线。修订本A扩大了覆盖范围，包括防潮袋（MBB）、烘烤对印刷板可焊性的影响、ESD问题、蚀刻芯和复合材料的湿度问题、干燥剂材料和HIC卡以及包装和处理要求的示例流程。2017年8月翻译。

IPC-1601 - Revision A - Standard Only

Guía para el manejo y almacenamiento de tarjetas impresas

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  08/21/2018
Language
Spanish
Current Revision
La única guía de la industria para el manejo, empaquetado y almacenamiento de tarjetas impresas. Las pautas descritas en este documento tienen la intención de proteger las tarjetas impresas de contaminación, daños físicos, degradación y absorción de humedad. Se consideran los tipos de materiales y métodos de empaquetado, los entornos de producción, el manejo y transporte del producto y se...

IPC-J-STD-001 - Revision F - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to J-STD-001F

Document #:
IPC-J-STD-001
Revision
F
Product Type
Addendum
Released:  02/12/2015
Language
English
This Addendum supplements or replaces specifically identified requirements of IPC J-STD-001, Revision F, for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space.
no-image-available

IPC-J-STD-001 - Revision E - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC J-STD-001E Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
E
Product Type
Addendum
Released:  12/01/2010
Language
English
When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC J-STD-001, Revision E of April 2010 by providing additional requirements to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required...
IPC-6018DS

IPC-6018 - Revision D - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6018D, Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
D
Product Type
Addendum
Released:  08/04/2022
Language
English
The IPC-6018DS addendum supplements or replaces specifically identified requirements of IPC-6018D, for high frequency (microwave) printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics. The IPC-6018DS addendum incorporates new requirements in areas such as copper wrap plating, dewetting, pad/land anomalies, copper cap plating...

IPC-6012 - Revision E - Amendment 1

刚性印制板的鉴定及性能规范- 修订本1

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  10/28/2022
Language
Chinese
Current Revision
IPC-6012E-AM1是IPC-6012E的修订本，澄清了再流焊SnPb或HASL镀层中退润湿和焊料回缩之间的区别。 该修订本还为成品印制板的最小外部导体厚度提供了修订标准，并为内部电镀层的最小厚度提供了新的接受标准。

IPC/WHMA-A-620 - Revision D - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620D

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Addendum
Released:  10/07/2020
Language
English
IPC/WHMA-A-620D-S space addendum provides additional requirements to IPC/WHMA-A-620D standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620D-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-J-STD-001 and IPC-A-610 - Revision G - Addendum - Automotive

Automotive Addendum to IPC J-STD-001G Requirements for Soldered Electrical and Electronic Assemblies and IPC-A-610G Acceptability of Electronic Assemblies

Document #:
IPC-J-STD-001 and IPC-A-610
Revision
G
Product Type
Addendum
Released:  03/18/2020
Language
English
The IPC J-STD-001GA/IPC-A-610GA automotive addendum to J-STD-001G and IPC-A-610G provides criteria to ensure the reliability of mission-critical soldered automotive electrical and electronic assemblies in the field under harsh environments and considers the conditions of automated high-volume production. The IPC J-STD-001GA/IPC-A-610GA addendum is not a standalone document. The addendum requires...

IPC-A-610 - Revision G - Addendum - Telecom

Telecom Addendum to IPC-A-610 Revision G Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  10/01/2019
Language
English
The IPC-A-610GC Telecom Addendum to IPC-A-610G Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision G by providing additional requirements to ensure that electrical and...
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Cerințe pentru Ansamblurile Electrice și Electronice Lipite

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/28/2016
Language
Romanian
Current Revision
Acesta este un amendament la standardul IPC J-STD-001F, un standard industrial recunoscut și adoptat, acoperind cerințe de materiale și procese. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire, reprezentări grafice noi pentru montarea...

IPC-J-STD-001 - Revision G - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC J-STD-001G Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
G
Product Type
Addendum
Released:  04/16/2018
Language
English
The IPC-J-STD-001GS space addendum supplements or replaces specifically identified requirements of IPC J-STD-001G for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space and military applications.

IPC-6012 - Revision D - Addendum - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  04/01/2016
Language
English
This Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry.

IPC-A-610 - Revision F - Addendum - Telecom

Telecom Addendum to IPC-A-610 Revision F Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Addendum
Released:  02/02/2017
Language
English
This Telecom Addendum to IPC-A-610F Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision F by providing additional requirements to ensure that electrical and electronic...
no-image-available

IPC-6012 - Revision D - Amendment 1

Sert Baskı Devre Kartları İçin Kalifikasyon ve Performans Spesifikasyonu

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  01/25/2019
Language
Turkish
Current Revision
Bu döküman; kaplı delikiçine sahip olan veya olmayan tek yüzlü, çift yüzlü baskı devre kartları ve kör/gömülü geçiş deliklerine sahip olan veya olmayan çok katmanlı baskı devre kartları ile metal çekirdekli kartları içeren sert baskı devre kartlarının kalifikasyonunu ve performansını kapsamaktadır. Son kaplama ve yüzey kaplama gereklilikleri, iletkenler, delikler/geçiş delikleri, kabul testlerinin...

IPC-6012 - Revision D - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  09/22/2015
Language
English
This Addendum supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics
no-image-available

IPC-A-610 - Revision D - Addendum - Telecom

IPC-A-610DC-Telecom Addendum

Document #:
IPC-A-610
Revision
D
Product Type
Addendum
Released:  08/01/2009
Language
English
Telecom Addendum to IPC-A-610D Acceptability of Electronic Assemblies Telecom Addendum Published August 2009. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC-A-610, Revision D of February 2005 by providing additional requirements to ensure compliance to GR-78-CORE.

IPC/WHMA-A-620 - Revision C - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  03/30/2018
Language
English
IPC/WHMA-A-620C-S provides additional requirements to IPC/WHMA-A-620C to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620C-S space addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620C.
no-image-available

IPC/WHMA-A-620 - Revision B - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620B

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Addendum
Released:  06/01/2013
Language
English
When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision B, providing additional requirements to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required IPC training & certification...
no-image-available

IPC-A-620 - Revision A - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Addendum
Released:  07/16/2012
Language
English
IPC/WHMA-A-620AS with Amendment 1 Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A Requirements and Acceptance for Cable and Wire Harness Assemblies. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A of July 2006 by providing additional requirements to ensure the...

IPC-6018 - Revision C - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6018C Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
C
Product Type
Addendum
Released:  08/09/2016
Language
English
This Addendum supplements or replaces specifically identified requirements of IPC-6018C, for high frequency (microwave) printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics.

IPC-1602 - Standard Only

Standard for Printed Board Handling and Storage

Document #:
IPC-1602
Revision
Original Version
Product Type
Standard Only
Released:  04/07/2020
Language
English
The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...

IPC-2291 - Standard Only

Design Guideline for Printed Electronics

Document #:
IPC-2291
Revision
Original Version
Product Type
Standard Only
Released:  07/30/2013
Language
English
This guideline provides an overview of the design process flow for printed electronics based devices, modules and units, and final products.The intent of IPC/JPCA-2291 is to establish a design process flow that will facilitate and improve the practice of printed electronics design. IPC/JPCA-2291 identifies documents such as standards that can be used to assist during the design process flow. 24...

IPC-4552 - Standard with Amendment 1&2

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  06/26/2013
Language
English
In answer to numerous industry requests for guidance on electroless nickel/immersion gold (ENIG), IPC-4552 was developed. Containing full color photographs, this specification sets the requirements for the use of ENIG as a surface finish for printed boards. It includes requirements for ENIG deposit thicknesses based on performance criteria. It is an invaluable resource for use by suppliers, board...
no-image-available

IPC-J-STD-001 - Revision H - Addendum - Space and Military

Ergänzung Elektronik-Hardware für Raumfahrt- und Militäranwendungen zu IPC J-STD-001H Anforderungen an gelötete elektrische und elektronische Baugruppen

Document #:
IPC-J-STD-001
Revision
H
Product Type
Addendum
Released:  06/22/2022
Language
German
Current Revision
Die Richtlinie IPC J-STD-001HS-DE Ergänzung für Raumfahrt-Anwendungen ergänzt oder ersetzt spezifisch identifizierte Anforderungen von IPC J-STD-001H-DE für gelötete elektrische und elektronische Baugruppen, die Schwingungen und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischen Anwendungen überstehen müssen.

IPC-4761 - Standard Only

Design Guide for Protection of Printed Board Via Structures

Document #:
IPC-4761
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2006
Language
English
IPC-4761 is the sole industry guideline providing PCB designers, manufacturers and uses with detailed information on all existing methods for protecting vias on printed boards, including all types of via tenting, plugging, filling and capping. Production issues, long term reliability concerns and material specification and selection are provided to aid in evaluating the benefits and concerns for...
no-image-available

IPC-J-STD-001 - Revision J - Addendum - Space and Military

J-STD-001Jはんだ付される電気および電子組立品に関する要求事項：宇宙・軍事用途向け追加規格

Document #:
IPC-J-STD-001
Revision
J
Product Type
Addendum
Released:  01/22/2026
Language
Japanese
Current Revision
“IPC J-STD-001JS 宇宙・軍事用途向け追加規格”は、IPC J-STD-001Jの要求事項のうち特定の要件を補完する/置き換えるものであり、宇宙および軍事用途において、輸送時や運用時の振動/熱サイクル環境に耐えることが求められる電気・電子組立品を対象としている。

IPC-4821 - Standard Only

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Standard Only
Released:  05/01/2006
Language
English
This document describes materials that can be used for the fabrication of embedded passive capacitor devices within the finished printed circuit board substrate. For this document, embedded passive devices and the phrase embedded passives are considered to be equivalent. It provides information on general designations and associated characteristics of embedded passive device (EPD) capacitor...
no-image-available

IPC-1754 - Standard with Amendment 1

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  04/26/2019
Language
English
IPC-1754 WAM 1 Materials and Substances Declaration for Aerospace and Defense and Other Industries establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
no-image-available

IPC-J-STD-001 and IPC-A-610 - Revision J - Addendum - Automotive

IPC J-STD-001J はんだ付される電気および電子組立品、およびIPC-A-610J 電子組立品の許容基準：車載用途向け追加規格

Document #:
IPC-J-STD-001 and IPC-A-610
Revision
J
Product Type
Addendum
Released:  01/05/2026
Language
Japanese
Current Revision
IPC J-STD-001JA/IPC-A-610JAは、J-STD-001JおよびIPC-A-610Jの車載用途向け追加規格である。本書は、自動化された大量生産という条件を考慮しながら、過酷な環境下にある車載用電気・電子組立品について、そのはんだ付け信頼性を保証するための基準を提供するものである。 IPC J-STD-001JA/IPC-A-610JA(Addendum：追加規格)は独立した文書として使用するのではなく、J-STD-001JおよびIPC-A-610Jと併用する必要がある。
IPC-2591_1-5 Cover Image

IPC-2591 - Version 1.5 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.5
Product Type
Standard Only
Released:  08/04/2022
Language
English
IPC-2591, CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical...

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
no-image-available

IPC-4554 - Standard with Amendment

Specification for Immersion Tin Plating for Printed Circuit Boards

Document #:
IPC-4554
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  08/10/2012
Language
English
IPC-4554, Specification for Immersion Tin Plating for Printed Circuit Boards, is included in the IPC-455X series of specifications that set the requirements for printed board surface finishes that are alternates to non-coplanar finishes, most often referred to as tin-lead HASL finish. This specification is a full-color document that is intended for use by the supplier or printed board fabricator...
no-image-available

IPC-SMEMA 3.1 - Standard Only

SMEMA3.1 - Fiducial Mark Standard

Document #:
IPC-SMEMA 3.1
Revision
Original Version
Product Type
Standard Only
Released:  02/12/2007
Language
English
This SMEMA standard is for fiducial marks. It was developed to facilitate the accurate placement of components on printed circuit boards.
526-600 of 1001

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards