Menu
Close
Contact Us

Standards

Your results

  • 1001

Document #

Language

Products

J-STD-001H Vietnamese Cover Image

IPC-J-STD-001 - Revision H - Standard Only

Các Yêu Cầu Cho Các Sản Phẩm Điện và Điện Tử Hàn Lắp Ráp

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  01/10/2022
Language
Vietnamese
Current Revision
IPC-J-STD-001H Được công nhận trên toàn cầu về tiêu chuẩn cho các quy trình hàn và các nguyên vật liệu. Được cập nhật với những người tham gia từ 27 quốc gia cung cấp đầu vào và ý kiến chuyên môn, tiêu chuẩn IPC-J-STD-001H mang đến các tiêu chuẩn mới nhất cho ngành công nghiệp cùng với hướng dẫn sử dụng tia X để kiểm tra các tình trạng mối hàn xuyên lỗ mà không thể kiểm tra được bằng các phương...
IPC-A-610H Korean Cover Image

IPC-A-610 - Revision H - Standard Only

전자 어셈블리의 허용 가능성

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  01/10/2022
Language
Korean
Current Revision
IPC-A-610H는 전자 산업에서 가장 널리 사용되는 전자 어셈블리 허용 표준이다. IPC-A-610H 표준은 문서에 대한 일반 업데이트를 포함하며, 몇 가지 새로운 표면 실장 소자 유형을 도입하고 대상 조건을 제거한다. 29개국에서 온 참가자들은 이 문서를 전자 산업에 가져오기 위해 그들의 조언과 전문지식을 제공했다. 이는 전자 어셈블리의 허용 기준에 관심이 있는 검사자, 작업자 및 기타 사용자에게 반드시 필요한 사항이다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620과 함께 개발되었다.
IPC-A-610H Hungarian cover image

IPC-A-610 - Revision H - Standard Only

Elektronikai szerelvények elfogadhatósága

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Hungarian
Current Revision
Az IPC-A-610 a világon legszélesebb körben használt elektronikai szerelvényekkel foglalkozó szabvány. Az IPC-A-610H szabvány jó néhány dokumentum általános frissítését tartalmazza, számos új felületszerelt alkatrésztípus követelményeivel kiegészült és megszüntetésre került a cél állapot kritérium. A szabvány 29 országból beérkező újabb észrevételek, szakvélemények alapján biztosítja az...
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

焊接的电气和电子组件要求

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/12/2021
Language
Chinese
Current Revision
IPC-J-STD-001H是全球公认的焊接工艺和材料标准。 此次更新由27个国家/地区参与者参与编制，这些参与者在本文件更新期间投入了大量的精力并贡献了宝贵的专业知识。IPC-J-STD-001H标准是业内最新标准，包含了有关使用X射线方法检查其他方法难以检测的通孔焊料状况的指导信息。 IPC-J-STD-001H是关注电子行业电气和电子组件工艺和验收标准的人员必须掌握的技术标准。 J-STD-001是与IPC-A-610一起制定的标准，由IPC-HDBK-001提供支持，其中包含了一些额外信息和要求释义。如果您已购买了IPC-J-STD-001H，您还需要购买并使用IPC-A-610H，二种标准需要配合使用。
no-image-available

IPC-A-600 - Revision H - Standard Only

Acceptanskrav för mönsterkort

Document #:
IPC-A-600
Revision
H
Product Type
Standard Only
Released:  10/13/2010
Language
Swedish
Current Revision
NOUVEAU! Cette version prend en compte les exigences et les critères d’acceptabilité liés à l’utilisation d’alliages sans plomb. La révision A du standard industriel consensuel dénomé Critères d’Acceptation pour l’Assemblage de Câbles et de Faisceaux de câbles est désormais disponible. IPC et l’association Wire Harness Manufacturers Association (WHMA), ont collaboré pour développer de manière...
no-image-available

IPC-A-610 - Revision H - Standard Only

Tiêu Chuẩn Chấp Nhận Các Sản Phẩm Lắp Ráp Điện Tử

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  09/16/2021
Language
Vietnamese
Current Revision
IPC-A-610 là tiêu chuẩn chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Tiêu chuẩn IPC-A-610H bao gồm một cập nhận tổng quát, giới thiệu một số loại linh kiện SMT mới và loại bổ tình trạng mục tiêu. Những người tham gia từ 29 quốc gia cung cấp đầu vào và ý kiến chuyên môn để mang đến tài liệu này cho ngành công nghiệp điện tử. Đây là bộ tiêu chuẩn...
IPC-A-610H RO Cover Image

IPC-A-610 - Revision H - Standard Only

Acceptabilitatea Ansamblurilor Electronice

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Romanian
Current Revision
IPC-A-610H este cel mai folosit standard de acceptabilitate pentru asamblare electronice din industria electronică. Standardul IPC-A-610H include o actualizare generală a documentului, introduce mai multe tipuri noi de componente cu montare pe suprafață și elimină condițiile Obiectiv. Participanții din 29 de țări și-au adus contribuția și expertiza lor pentru a da acest document industriei...

IPC-A-600 - Revision J - Standard Only

プリント板の受け入れ

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  06/28/2017
Language
Japanese
Current Revision
本書は、プリント板の、外部または内部で観察可能な、目標、許容可能、または不適合条件について記載している。現在のIPC規格で求められている要求事項を、目に見える形で示しており、プリント板がこれら文書の規定に従わない場合には、製品の受け入れ基準は発注・受入当事者の合意のよるものとする。120の写真とイラストを追加/更新して、リビジョンEから改版が行われました。 本書は、明確な図解入りでプリント板の受け入れ基準を記述している。この4色のドキュメントは、部品実装前のプリント板 (ベアボード) の外観または内部的に観察可能な、許容可能な条件と不適合な条件を写真と説明図で記載している。業務に携わる作業者、検査員、技術者は、業界が合意した最新情報を把握していることを確認すべきである。改訂J版は、120以上の新規または改善した写真と説明図を使用して、マイクロビアと接合の大きさ (寸法)、銅めっき...
IPC-A-610H Thai Cover Image

IPC-A-610 - Standard Only

การยอมรับได้ของงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-A-610H เป็นมาตรฐานการยอมรับการประกอบอุปกรณ์อิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายมากที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ มาตรฐาน IPC-A-610H มีการอัพเดตทั่วไปในเอกสาร, แนะนำตัวอุปกรณ์ที่ติดตั้งบนพื้นผิวประเภทใหม่ๆ หลายประเภท และลบสภาวะเป้าหมายออกไป ผู้เข้าร่วมจาก 29 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปสู่อุตสาหกรรมอิเล็กทรอนิกส์ นี่เป็นสิ่งที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน...
J-STD-001H-TH Cover Images

IPC-J-STD-001 - Standard Only

ข้อกำหนดสำหรับงานบัดกรีทางไฟฟ้าและงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-J-STD-001H เป็นที่ยอมรับทั่วโลกในด้านเกณฑ์กระบวนการและวัสดุในการบัดกรี อัปเดตด้วยผู้เข้าร่วมจาก 27 ประเทศที่ให้ข้อมูลและความเชี่ยวชาญ มาตรฐาน IPC-J-STD-001H นำเกณฑ์ล่าสุดมาสู่อุตสาหกรรม รวมถึงคำแนะนำเกี่ยวกับการใช้เอ็กซ์เรย์เพื่อตรวจสอบสภาพการบัดกรีผ่านรูที่มองไม่เห็นโดยวิธีอื่น IPC-J-STD-001H...

IPC-A-600 - Revision J - Standard Only

Baskı Devre Kartlarının Kabul Edilebilirliği

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  01/03/2019
Language
Turkish
Current Revision
Baskı devre kartları kabul edilebilirliği için açıklamalı resimli bir rehber! Bu dört renkli döküman çıplak baskı devre kartlarında iç kısımdan ya da dışarıdan gözlemlenebilen hedef, kabul edilebilir ve uygun olmayan koşullar için fotoğraflar ve şekiller sağlamaktadır. Operatörleriniz, denetleme personeliniz ve mühendislerinizin en son yayınlanmış revizyonu kullanmasını sağlayınız. 120 adet yeni...
no-image-available

IPC-6012 - Revision D - Addendum with Amendment 1 - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum with amendment(s)
Released:  12/01/2018
Language
English
The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...

IPC-J-STD-001 - Revision F - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Addendum with amendment(s)
Released:  02/01/2017
Language
English
This addendum supplements J-STD-001F for soldered assemblies that must survive the vibration and thermal cyclic environments associated with space hardware. It is to be used with J-STD-001FS WAM 1.
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/01/2015
Language
English
This is an amendment to IPC J-STD-001F, a recognized industry-consensus standard covering materials and processes. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements and BGA voiding criteria, new graphics for several surface mount component types, revised staking criteria, and recognition of the paragraphs addressed in J-STD-001FS, Space...
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  12/14/2015
Language
English
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC-A-610 - Revision J - Standard Only

전자 조립품의 허용성

Document #:
IPC-A-610
Revision
J
Product Type
Standard Only
Released:  12/10/2025
Language
Korean
Current Revision
IPC-A-610J는 전자 산업에서 가장 널리 사용되는 전자 조립품 허용 표준서이다. 본 표준서는 31개국의 참여자가 제공한 정보와 전문지식을 바탕으로 전자 산업계에 제공된다. 본 표준서는 전자 조립품 허용기준에 관심 있는 검사자, 운용자 등이 반드시 소지해야 한다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620와 호환하도록 개발되었다.

IPC-A-610 - Revision G - Standard Only

Критерии приемки электронных сборок

Document #:
IPC-A-610
Revision
G
Product Type
Standard Only
Released:  04/09/2020
Language
Russian
Current Revision
Описание на русском IPC-A-610 – наиболее широко используемый в мире стандарт по приемке электронных сборок. Этот документ, в усовершенствование которого внесли свой вклад участники из 17 стран, поделившись информацией и своими знаниями и опытом, предоставляет отрасли новейшие критерии наряду со множеством новых и обновленных иллюстраций. Этот документ – то, что обязательно нужно иметь контролерам...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Reprise, Modification et Réparation des Assemblages Electroniques

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  06/27/2025
Language
French
Current Revision
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
no-image-available

IPC/WHMA-A-620 - Revision B - Amendment 1

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Amendment
Released:  08/01/2013
Language
English
This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B. When there are changes to a...
no-image-available

IPC/WHMA-A-620 - Revision E - Standard Only

Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  03/05/2025
Language
German
Current Revision
IPC/WHMA-A-620E ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620E beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo y/o al proceso

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  02/18/2019
Language
Spanish
Current Revision
El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Retrabajo, Modificacion y Reparacion de Ensambles Electronicos

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  01/05/2026
Language
Spanish
Current Revision
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
376-400 of 1001

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards