Menu
Close
Contact Us

Study/Technical Report

Your results

Document #

Language

Products

IPC-TR-583 - Study/Report

An In-Depth Look At Ionic Cleanliness Testing

Document #:
IPC-TR-583
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/2002
Language
English
Current Revision
This original research was a cooperative effort between the EMPF and IPC, released as EMPF-RR-0013 in 1993 for better understanding of ionic cleanliness testing. The IPC Ionic Conductivity/Ion Chromatography Test Task Group has validated its continued importance and relevance to the cleaning community and IPC-TR-583 is the result. It includes how solvent temperature influences the final...
no-image-available

IPC-582 - Study/Report

Cleaning & Cleanliness Test Program for Phase 3-Low Solids Fluxes & Pastes Processed in Ambiant Air

Document #:
IPC-TR-582
Revision
Original Version
Product Type
Study/Technical Report
Released:  10/02/2018
Language
English
Current Revision
This document details the test procedures, test results and team conclusions for the IPC Cleaning and Cleanliness Testing Program, Phase 3, Low Solids Flux in Ambient Air. This effort has been part of a multi-stage program to investigate material and process alternatives to the use of chlorofluorocarbons (CFCs) in electronics manufacturing. This Phase 3 effort has been dedicated to characterizing...

IPC-TR-585 - Study/Report

Time, Temperature and Humidity Stress of Final Board Finish Solderability

Document #:
IPC-TR-585
Revision
Original Version
Product Type
Study/Technical Report
Released:  05/01/2006
Language
English
Current Revision
This Technical Report details the investigations into identifying stress tests that distinguish between robust and non-robust surface finishes. A robust finish will pass a test for solderability whereas a non-robust finish will fail. The stress tests identified do not necessarily duplicate real world environment (fabrication of the bare printed board through assembly), but they must correlate to...
no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Released:  08/04/2020
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...
no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...
no-image-available

IPC-TR-586 - Standard Only

Immersion Silver Plating Thickness Round Robin Investigation Data Set Compendium

Document #:
IPC-TR-586
Revision
Original Version
Product Type
Study/Technical Report
Released:  03/01/2009
Language
English
This technical report provides the documentation of a round robin testing effort that generated data used by the 4-14 Plating Processes Subcommittee in developing the maximum immersion silver plating thickness requirement in the revision A of IPC-4553. This compendium of data resulted from three information sets: a) Test vehicle assembly report by Celestica, b) Thermal cycle test report by...
1-7 of 7

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards