Menu
Close
Contact Us

Study/Technical Report

Your results

Document #

Language

Products

IPC-TR-486 - Study/Report

Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-layer Separations

Document #:
IPC-TR-486
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/2001
Language
English
Current Revision
This technical report provides full detail of the round robin study charged with assessing the use of Interconnect Stress Test (IST) as a test for incoming inspection in lieu of Thermal Stress in the detection of innerlayer separations in plated-through holes. Includes background on the Post Separation Task Group, test results, round robin test plan, conclusions and test methods used. 51 pages...

IPC-TR-583 - Study/Report

An In-Depth Look At Ionic Cleanliness Testing

Document #:
IPC-TR-583
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/2002
Language
English
Current Revision
This original research was a cooperative effort between the EMPF and IPC, released as EMPF-RR-0013 in 1993 for better understanding of ionic cleanliness testing. The IPC Ionic Conductivity/Ion Chromatography Test Task Group has validated its continued importance and relevance to the cleaning community and IPC-TR-583 is the result. It includes how solvent temperature influences the final...
no-image-available

IPC-582 - Study/Report

Cleaning & Cleanliness Test Program for Phase 3-Low Solids Fluxes & Pastes Processed in Ambiant Air

Document #:
IPC-TR-582
Revision
Original Version
Product Type
Study/Technical Report
Released:  10/02/2018
Language
English
Current Revision
This document details the test procedures, test results and team conclusions for the IPC Cleaning and Cleanliness Testing Program, Phase 3, Low Solids Flux in Ambient Air. This effort has been part of a multi-stage program to investigate material and process alternatives to the use of chlorofluorocarbons (CFCs) in electronics manufacturing. This Phase 3 effort has been dedicated to characterizing...

IPC-TR-579 - Study/Report

Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in PWBs

Document #:
IPC-TR-579
Revision
Original Version
Product Type
Study/Technical Report
Released:  09/01/1988
Language
English
Current Revision
Approximately 200,000 plated through-holes, covering primarily electroplated but also electroless technology, were exposed to several different thermal cycles. A number of PTH diameters, board constructions and plating thicknesses were evaluated. 80 pages. Released September 1988.
no-image-available

IPC-TR-549 - Study/Report

Measles in Printed Wiring Boards

Document #:
IPC-TR-549
Revision
Original Version
Product Type
Study/Technical Report
Released:  12/02/2014
Language
English
Current Revision
An IPC Blue Ribbon Committee originally published this study. It provides extensive background and test results resolving methods to identify visible conditions such as measles in PWBs and that measles do not impact reliability. 81 Pages. Released November 1973.
no-image-available

IPC-TR-467 - Study/Report

Supporting Data and Numerical Examples for ANSI/J-STD-001B APPENDIX D (Control of Fluxes)

Document #:
IPC-TR-467
Revision
Original Version
Product Type
Study/Technical Report
Released:  10/01/1996
Language
English
Current Revision
This addendum to J-STD-001, originally developed for Revision B but also applicable to Revision C, proposes solutions for cost-effective testing and increased implementation. Also covers other assembly test methods that are not addressed in J-STD-001. 12 pages. Released October 1996. Now available in electronic format.
no-image-available

IPC-TR-465-3 - Study/Report

Evaluation of Steam Aging on Alternative Finishes, Phase 11A

Document #:
IPC-TR-465
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/1996
Language
English
Current Revision
Details the results of a two-year study to determine the effect of steam aging exposure on components. A variety of solderable finishes were used. A small production simulation utilized preconditioned and as-received samples and tested a total of 2,000 joints. 15 pages. Released July 1996.

IPC-TR-585 - Study/Report

Time, Temperature and Humidity Stress of Final Board Finish Solderability

Document #:
IPC-TR-585
Revision
Original Version
Product Type
Study/Technical Report
Released:  05/01/2006
Language
English
Current Revision
This Technical Report details the investigations into identifying stress tests that distinguish between robust and non-robust surface finishes. A robust finish will pass a test for solderability whereas a non-robust finish will fail. The stress tests identified do not necessarily duplicate real world environment (fabrication of the bare printed board through assembly), but they must correlate to...
no-image-available

IPC-TR-001 - Study/Report

An Introduction to Tape Automated Bonding Fine Pitch Technology

Document #:
IPC-TR-001
Revision
Original Version
Product Type
Study/Technical Report
Released:  01/01/2006
Language
English
Current Revision
This document, co-developed by the IPC, EIA and ASTM, represents a comprehensive report on fine pitch technology with an emphasis on tape-automated bonding and design rules. Subjects include land pattern design, types of encapsulation, TAB tape format, assembly techniques and the advantages and disadvantages of FPT. 54 pages. Released by the Surface Mount Council January 1989.
no-image-available

IPC-TR-464 - Addendum with Amendment 1 - Other

Accelerated Aging for Solderability Evaluations-Addendum

Document #:
IPC-TR-464
Revision
Original Version
Product Type
Study/Technical Report
Released:  04/01/1987
Language
English
Current Revision
This addendum to IPC-TR-464 was released in April 1987 and represents the results of the task group study to evaluate and determine if the aging period recommended in the original Technical Report could be shortened and still provide the appropriate information on solderability retention.

IPC-TR-464 - Study/Report

Accelerated Aging for Solderability Evaluations

Document #:
IPC-TR-464
Revision
Original Version
Product Type
Study/Technical Report
Released:  04/01/1984
Language
English
This technical report was developed to meet the growing need for a standard method of evaluating the solderability retention capability of printed boards during inventory storage. 21 Pages. Released April 1984. IPC-TR-464 Addendum The addendum to IPC-TR-464 represents the results of the task group study to evaluate and determine if the aging period recommended in the original Technical Report...
no-image-available

IPC-TR-586 - Standard Only

Immersion Silver Plating Thickness Round Robin Investigation Data Set Compendium

Document #:
IPC-TR-586
Revision
Original Version
Product Type
Study/Technical Report
Released:  03/01/2009
Language
English
This technical report provides the documentation of a round robin testing effort that generated data used by the 4-14 Plating Processes Subcommittee in developing the maximum immersion silver plating thickness requirement in the revision A of IPC-4553. This compendium of data resulted from three information sets: a) Test vehicle assembly report by Celestica, b) Thermal cycle test report by...
1-13 of 13

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards