Search results

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

LʼIPC-A-600K est le guide illustré de référence sur lʼacceptabilité des circuits imprimés ! LʼIPC-A-600K est un document en quatre couleurs fournissant des photographies et des illustrations de la cible, des conditions « objectif », acceptables et non conformes qui sont observables en interne ou en externe sur des circuits imprimés nus. Veillez à ce que vos opérateurs, inspecteurs et ingénieurs...

This specification covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline, and high speed digital electrical and electronic circuits. In addition to updated testing parameters, inspection lot requirements, revised visual acceptance criteria, this revision incorporates a new specification...

IPC 1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported by a PDF form. In the A revision, the data exchange format is specified as Extensible Markup Language (XML) and IPC-1752A relies on third party...

This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.

Used in conjunction with IPC-2221, IPC-2222 establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. This standard applies to single-sided, double-sided or multi-layered boards. Key concepts in this document are: rigid laminate properties, design requirements for printed board assembly and design...

IPC-6011A Redline document shows the changes from IPC-6011 to IPC-6011A in a side-by-side comparison of the two documents. The IPC-6011A Redline is available in electronic format only.

Finally - an end to the confusion when calculating defect opportunities for benchmarking! For customers and manufacturers, it seems like every company has a unique way of calculating defects and then reporting on quality. In a complex electronics assembly operation, is it best to calculate using the number of components? The number of leads? What about solder joints? How can companies calculate...

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

关于印制板可接受性的权威图解指南！本四色文件提供了裸印制板内部或外部可观察到的目标、可接受和不符合条件的照片和示意图。确保您的操作人员、检验员和工程师掌握最新的行业共识信息。版本M新增或修订了数十张照片和示意图，新增和扩展了有关印制板边缘电镀、印制板阶梯槽、边缘毛刺、退润湿、导体厚度、环宽（重合度）、内部铜渗透和镀层空洞等主题的内容。本文件与 IPC-6012F 和 IPC-6013E 中表述的可接受性要求同步。取代 IPC-A-600K。

This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...

ภาพประกอบใช้เป็นคู่มือเพื่อแสดงการยอมรับได้ของบอร์ดพิมพ์! เอกสารสี่สีนี้ได้ให้ภาพถ่ายและภาพประกอบที่แสดงถึงสภาวะเป้าหมาย ยอมรับได้ และ ไม่สอดคล้องตามข้อกำหนด ซึ่งสามารถสังเกตเห็นได้ทั้งจากภายในหรือภายนอกบนบอร์ดพิมพ์เปล่า ตรวจสอบให้แน่ใจว่าผู้ปฏิบัติงาน ผู้ตรวจสอบ และวิศวกรของคุณมีข้อมูลที่เป็นเอกฉันทามติของอุตสาหกรรมที่เป็นปัจจุบันที่สุด ด้วยรูปถ่ายและภาพประกอบใหม่หรือที่มีการแก้ไขจำนวนมาก...

Những hướng dẫn được minh họa có tính định nghĩa cho khả năng chấp nhận đối với bảng mạch in! Tài liệu 4 màu này cung cấp các bức ảnh và các hình minh họa cho các tình trạng mục tiêu, chấp nhận và không phù hợp đối với các tình trạng quan sát được bên trong và bên ngoài bảng mạch in chưa lắp ráp. Hãy đảm bảo công nhân, người kiểm tra và các kỹ sư của bạn có được những thông tin đồng thuận mới nhất...

IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...

This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...

IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that was previously removed during the revision A actions. Unless otherwise agreed upon between the user and supplier (AABUS), metal foils...

This document summarizes the IPC position on the subject of “halogen-free” materials for the electronics industry. Its initial release was developed over a period of three years and this revision is also the culmination of another three years of work by a team representing every level of the electronics supply chain. This document is applicable to materials for interconnecting electronics...

IPC-A-600K是印制板可接受性的权威图示说明！IPC-A-600K是一份四色文档，提供了目标的照片和插图，可以在裸露的印刷电路板上内部或外部观察到的可接受和不符合的条件。确保您的操作员，检查员和工程师具有最新的行业共识信息。IPC-A-600K提供了数十种新的或经过修订的照片和插图，涵盖了诸如开裂，背钻结构，边缘连接器连接盘，铜包裹板，镀层空隙和微小异常，微孔目标连接盘穿刺，内层分离和镀层悬垂。该文档与IPC-6012E和IPC-6013D中表达的可接受性要求保持同步。取代IPC-A-600J。

The IPC J-STD-004C standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-004C standard may be used for quality control and procurement purposes.

IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.

IPC-A-600K是印刷電路板可接受性的權威圖示說明！IPC-A-600K是一份四色文檔，提供了目標的照片和插圖，可以在裸露的印刷電路板上內部或外部觀察到的可接受和不符合的條件。確保您的操作員，檢查員和工程師具有最新的行業共識資訊。IPC-A-600K提供了數十種新的或經過修訂的照片和插圖，涵蓋了諸如開裂，背鑽結構，邊緣連接器連接盤，銅包裹板，鍍層空隙和微小異常，微孔目標連接盤穿刺，內層分離和鍍層懸垂。該文檔與IPC-6012E和IPC-6013D中表達的可接受性要求保持同步。取代IPC-A-600J。

El IPC-A-600K es la guía ilustrada definitiva de admisibilidad de las placas impresas. El IPC-A-600K es un documento a cuatro colores donde se recogen fotografías e ilustraciones de las condiciones objetivo, aceptables y no conformes que son observables de forma interna o externa en placas impresas vacías. Verifique que sus operadores, inspectores e ingenieros dispongan de la más actualizada...

IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...